Controlling Audio
43
English
■
Tweeter (Only for Front)
You can set the tweeter when you are
selecting front speakers.
None, Small, Medium, Large
■
X’over
Displays the speaker crossover setup screen.
You can adjust the crossover setup that was
set automatically when you selected the
speaker type.
For details, see
Ñ
Crossover network setup
You can set a crossover frequency of speakers.
1
Touch
[
X
ʼ
over
]
.
2
Touch the speaker to set.
3
Set each item as follows.
■
HPF FREQ
High Pass Filter adjustment. (When front or
rear speaker is selected on Speaker Select
screen)
■
LPF FREQ
Low Pass Filter adjustment. (When subwoofer
is selected on Speaker Select screen)
■
Slope*
1
Sets a crossover slope.
■
Gain
Adjusts the front speaker, rear speaker, or
subwoofer level.
■
TW (Tweeter) Gain *
2
Adjusts the tweeter level. (When front is
selected on Speaker Select screen)
■
Phase Inversion*
3
Sets the phase of subwoofer output.
Check
[
Phase Inversion
]
to shift the phase
180 degrees. (When subwoofer is selected
on Speaker Select screen)
*
1
Only when “LPF FREQ”/“HPF FREQ” is set to
a mode other than “Through” in
[
X
ʼ
over
]
.
*
2
Only when “Tweeter” is set to “Small”,
“Medium”, “Large” in
[
Speaker Setup
]
.
*
3
Only when “Subwoofer” is set to a mode
other than “None” in
[
Speaker Setup
]
.
Controlling General Audio
1
Press the
[
button.
2
Touch
[
]
.
3
Touch
[
Audio
]
.
h
h
Audio screen appears.
4
Touch
[
Fader / Balance
]
.
5
Set each item as follows.
■
Fader / Balance
Adjust the volume balance around the
touched area.
[
C
]
and
[
D
]
adjust the right and left volume
balance.
[
R
]
and
[
S
]
adjust the front and rear volume
balance.
■
[
Center
]
Clear the adjustment.
!B5A-2246-20_JVC_EnFr_2nd.indb 43
2019/06/14 14:05
