Connection/Installation
50
NOTE
• Swap the clips if necessary.
Ñ
Removing the trim plate
1) Use the extraction key (accessory
5
to lever
out the four tabs (two on the left part, two on
the right part).
2) Pull the trim plate forward.
Ñ
Removing the unit
1) Remove the trim plate by referring to step 1
in “Removing the trim plate”.
2) Insert the extraction key (accessory
2
)
deeply into the slot as shown. (The protrusion
at the tip of the extraction key must face
toward the unit.)
2
3) With the inserted extraction key secured,
insert the other extraction key into the slot.
4) Pull out the unit halfway.
NOTE
• Be careful to avoid injury from the catch
pins on the extraction key.
5) Pull the unit all the way out with your hands,
being careful not to drop it.
5
!B5A-2246-20_JVC_EnFr_2nd.indb 50
2019/06/14 14:05
