JVC KM-IP4100, Software User Manual

Page: 32 / 55

Page 32
TEXT Layer parameters setup
• Edit/Type the text content in the text field
• Format the text using the provided controls - Font, Size, Line Spacing, Style, Opacity, Alignment
in a usual text editor way.
• Setup the text position using the X-POS, Y-POS, Text Block Width, Text Block Height properties
• Setup the text animation using the In-Time, Out-Time, Crossfade properties
• The LAYER OFF, CANCEL, APPLY and SAVE buttons function the same way as described earlier.
CRAWL Text Layer parameters setup
The procedure is identical to editing a regular text layer with a few additional settings:
• SPEED - set the speed of text movement
• DIRECTIONAL BUTTONS - set the direction of the text movement
• LOOP - turn a loop of text movement on/off
• EDIT TEXT - enter a separate EDIT CRAWL TEXT pane to allow longer text edits
All the other controls function the same way as already described.
NOTE: X/Y POSITION parameters define the coordinates of the TOP LEFT corner of the text block within the video frame.
The TEXT BLOCK WIDTH and HEIGHT parameters define the width and height of the whole text block calculated from
the X/Y coordinate. (E.g.: If the X coordinate =0 and TEXT BLOCK WIDTH = 1920 px it means the text block is set to
the full width of the frame)