9
ENGLISH
2
1
Setting the clock
1
Press and hold SEL (select) for more
than 2 seconds so that one of the PSM
items appears on the display.
(See page 31.)
2
Set the hour.
1
Select “CLOCK H (hour)” if not shown on
the display.
2
Adjust the hour.
3
Set the minute.
1
Select “CLOCK M (minute).”
2
Adjust the minute.
4
Finish the setting.
To check the current clock time while the unit
is turned off, press DISP (D).
The power turns on, the clock time is shown for
5 seconds, then the power turns off.
2
1
Canceling the display
demonstration
When shipped from the factory, display
demonstration has been activated, and starts
automatically when no operations are done and
no sound comes in for about 3 minutes.
To cancel the display demonstration, follow
the procedure below.
1
Press and hold SEL (select) for more
than 2 seconds so that one of the
PSM items appears on the display.
(See page 31.)
2
Select “DEMO MODE” if not appears
on the display.
3
Select “OFF.”
4
Finish the setting.
To activate the display demonstration again,
repeat the same procedure and select “ON” in
step 3.
Note:
If the unit has been reset (and the power is on),
demonstration will start when no operation is done
and no sound comes in for about 10 seconds.
EN08-09SH909_707[J]5.pm5
1/16/02, 9:17 AM
9
