(No.MA596<Rev.005>)22/28
4.4
Service Information Clear Mode
Press and hold [2] key and [5] key and reset.
4.4.1 Default status immediately after the mode activation
It shall be same as normal activation.
4.4.2 Mode content
After entering this mode, Syscon shall clear the information stored for service and output the result to the display.
CD will be ejected upon process end.
Cleared information changes will take place only after reset.
The following table shows the data that is cleared.
Display
Display content
Details
Data Clear in
Progress
Data Clearing in Progress
Data Clear OK
Data cleared successfully
Data Clear NG
Data cleared with error
CD is ejected out after the data is being cleared.
I
I
I
N
T
A
L
I
Z
E
T
D
A
A
C
L
R
O
K
T
D
A
A
C
L
R
N
G
Display Blinks (250ms interval)
Information to Clear
Details
Storage area
CD mecha information
CD mecha log display
E2PROM
CD load error information display
E2PROM
CD eject error information display
E2PROM
CD time code error count information display (count skip)
E2PROM
CD time code error count information display (no count update)
E2PROM
Service information
CD EJECT number of times display
E2PROM
Forced Power OFF information display
E2PROM
DC error information
DC error 1 display (wrong connection & other detection information in detecting duration) E2PROM
DC error 2 display (capacitor leakage detection number information)
E2PROM
Tuner information
Tuner Area Setting
E2PROM
Preset Frequency
E2PROM
Preset PI code
E2PROM
Tagging information
Token data memory index
E2PROM
