(No.MA596<Rev.005>)17/28
SECTION 4
ADJUSTMENT
4.1
Outline
4.1.1 Panel
A symbol "
" in the key column indicates that the key should be pressed and held for 1 second or longer.
4.1.2 Test Modes
These test modes are available in normal production ROM.
Transition to Test Mode shall be available during DC Error detection.
4.1.3 Release from Test Mode
These actions will release the Test Mode and transit back to Normal Mode
RETURN
ACCENT
SEARCH
VOL
Test Mode
Mode
Source
Operation
Production Test Mode
-
All
Press and hold [DISP] key and [SOURCE] key and reset.
Service Test Mode
Normal Mode /
Production Mode
All
Pressing and holding [DISP] key, press [
] key for 7 seconds.
(Starting to press [DISP] key and [
] key at the same time can not
be entered into the mode)
Service Information Clear Mode
-
All
Press and hold [RETURN] key and [SOURCE] key and reset.
DC Error Information Mode
-
All
Press and hold [DISP] key and [
] key and reset.
DOP Test Mode
Normal Mode
All
Pressing and holding [SELECT] key, press [DISP] key for 7 sec-
onds.
(Starting to press [SELECT] key and [DISP] key at the same time
can not be entered into the mode)
HC Mecha Running Mode
-
All
Press and hold [SOURCE] key and [EJECT] key and reset.
Tunisia Area /
Tuner Span Change Mode
Normal Mode
All
Pressing and holding [VOL] key, press [RETURN] key for 3 sec-
onds.
Method
Remarks
Reset
All Modes
Momentarily voltage drop
All Modes
ACC OFF
All Modes
POWER OFF
All Modes
Panel Detach
All Modes