JVC JY-HM360AG, Instructions Manual

Page: 81 / 136

5 Press the Set button (
R
) to confirm the
range.
0
The check marks change from magenta to
green.
0
Pressing the [LOLUX/3] button while the
multiple clips are selected displays the action
selection screen. The following operations
can be performed.
0
Appends OK mark together:
[Add OK Mark]
B
[Selected Clips]
0
Deletes OK mark together:
[Delete OK Mark]
B
[Selected Clips]
0
Deletes selected clips together:
[Delete Clips]
B
[Selected Clips]
Memo :
0
Selecting clips appended with check mark and
pressing the [OIS/2] button will cancel the
selection.
0
If the operation is performed on multiple clips at
the same time, a progress bar appears. You can
stop the operation by pressing the Set button (
R
)
while the operation is in progress. However, it is
not possible to undo operations that are
completed.
Trimming Recorded Clips
You can extract (trim) the necessary parts of a clip
recorded in the SD card.
The trimmed clip is saved as a new file on the same
SD card as the original clip. No changes are made
to the original clip.
1 Switch to Media mode.
Switch the mode using the [MODE] selection
button on the side control panel.
2
Move the cursor to the clip to be trimmed.
Move the cursor to the clip to be trimmed using
the cross-shaped button (
JKH I
).
.
2
3
Press the [LOLUX/3] button.
The action selection screen is displayed.
4
Select [Trim This Clip], and press the Set
button (
R
).
Playback of the selected clip starts.
.
282min
0
12 :34 : 56
Jan 12, 2016
00: 00: 00.00
1920x1080
60 i HQ
4030 20 10 0
1000/ 2000
IN
OUT
TRIM
30min
11: 22: 33.00
11: 23: 44.00
00: 08: 22
A
B
C
4
A
Guide
Operation guide
B
Position bar
6
: Current position of the video
7
: Position to start trimming (in point)
8
: Position to end trimming (out point)
Selecting and Performing Operations on Multiple Clips
81
Playback