JVC JY-HM360AG, Instructions Manual

Page: 70 / 136

1 Set [Rec Mode] to “Pre Rec”.
(
A
P104 [ Rec Mode ] )
0
Set [Main Menu]
B
[System]
B
[Record
Set]
B
[Rec Mode] to “Pre Rec”.
0
The display changes (“STBY”
B
“STBY
P
”).
2 Press the [REC] button to start recording in
Pre Rec mode.
0
The display changes (“STBY
P
”
B
“
R
REC
P
”) and the card slot status indicator
lights up in red.
0
Press the [REC] button again to pause
recording. The display changes (“
R
REC
P
”
B
“STBY
P
”) and the card slot status
indicator lights up in green.
Caution :
0
When the interval between start and stop
recording is short, “STBY
P
” may not be
displayed immediately after recording is
complete.
“
R
REC
P
”
B
“STBY
P
” (“STBY” blinks in red)
B
“STBY
P
” is displayed.
0
When the SD card becomes full during
recording, recording stops and “STOP” is
displayed.
0
Video and audio before the above mentioned
time may not be recorded after recording starts
in the following cases.
0
Immediately after power on
0
Immediately after recording stops
0
Immediately after switching from Media
mode to Camera mode
0
Immediately after setting [Rec Mode]
0
Immediately after the end of Clip Review
0
Immediately after changing file format
0
Immediately after changing video format
Clip Continuous Rec
0
In normal recording, when the recording stops,
the image, audio, and accompanying data from
the start till the end of the recording are recorded
as one “clip” on the SD card.
0
This mode allows you to consolidate several
rounds of “startstop recording” into one clip.
Example:
In normal recording, three clips are generated as
Recording 1, Recording 2, and Recording 3.
However, recording in this mode generates only
one clip.
.
(Recorded video and audio)
Completed Clip
Recording 3 Recording 2 Recording 1
Recording 3 Recording 2 Recording 1
(Recording stops)
Press and hold [REC]
(Recording pauses)
Press [REC]
(Recording pauses)
Press [REC]
(Recording resumes)
Press [REC]
(Recording resumes)
Press [REC]
(Recording starts)
Press [REC]
1
Set “Rec Mode” to “Clip Continuous”.
(
A
P104 [ Rec Mode ] )
0
Set [Main Menu]
B
[System]
B
[Record
Set]
B
[Rec Mode] to “Clip Continuous”.
0
The display changes (“STBY”
B
“STBY
C
”).
2
Start recording. (Recording 1)
0
Press the [REC] button to start recording in
Clip Continuous mode.
0
The display changes (“STBY
C
”
B
“
R
REC
C
”) and the card slot status indicator
lights up in red.
3 Pause recording.
0
Press the [REC] button again to pause
recording. The display changes (“
R
REC
C
”
B
“STBY
C
” (yellow text)).
0
The card slot status indicator remains lighted
in red.
Memo :
0
When the [CANCEL] button is pressed while the
camera recorder is paused (STBY
C
), the
display changes (“STBY
C
” (yellow text)
B
“STBY
C
” (blinking yellow text)
B
“STBY
C
”
(white text)), and a “clip” is generated. The card
slot status indicator lights up in green.
4
Resume recording. (Recording 2)
0
Press the [REC] button again to resume
recording. The display changes (“STBY
C
”
(yellow text)
B
“
R
REC
C
”).
0
The card slot status indicator remains lighted
in red.
70
Special Recording
Sh
ooting