background image

EN 

37

1

P.AE/Effect buttons

• Selects one of the 5 P.AE/Effects

available per programmed scene.

• To cancel the selected effect, click the

EC (Effect Clear) button.

2

Fade/Wipe Effect buttons

• Selects one of the 7 Picture Wipes or 10

Fades/Wipes available per scene
transition.

• To cancel the selected effect, click the

TC (Transition Clear) button.

3

Elapsed Time

• Displays the total elapsed time of all the

programmed scenes.

4

Button for Opening the Controller
Window

• Displays the controller.
• Can be displayed even when selecting

the menu Window — Controller.

5

Program list

• Displays the following setting

information beginning from the left:
Scene number, In point, P.AE/Effect, Out
point, Fade/Wipe Effect, Duration Time
Counter, and Memo.

• Up to 99 programs can be set per file for

scenes specified by an In and Out point.

6

ID number

• Displays the video source unit’s ID

number.

• An ID number can be clicked to display

the JLIP Devices dialog box as well as
when switching the serial port or
performing JLIP devices scanning.

7

Edit Indicator

• In Normal mode, the deck being

operated is displayed in green.

• In Edit mode, both deck indicators light

(Player: Green, Recorder: Red) and an
arrow also lights.

• The recorder lights red between the In

point and Out point while the recorder
is actually recording.

• Clicking on either deck selects the one

to be operated.

8

Tape counter display

• Displays the current tape position.

ex.

00:

01:

45:

10

(Hours : Minutes : Seconds : Frames)

• The digital camera’s counter uses a

drop-frame system.

9

Close button

• Close the controller window.

0

Edit buttons

A. Edit Standby button

• The player is put into Pause mode for

the Syncro Edit pre-roll time already set
on the Options dialog box (see
page 52).

• This button is used when VCRs not

compatible with this editing system and
performing manual editing.

• This button cannot be clicked when the

counter reads less than 00:00:30:00.

• This button cannot be clicked when the

player is not paused.

B. Syncro Edit button

• After going into Playback-Pause mode at

the In point of the recorder and player,
clicking this button rewinds both decks
by the pre-roll amount and executes the
first event.

• Since no Out point is specified, the

Syncro Edit is stopped using Stop.

• This button cannot be clicked when the

counter reads less than 00:00:30:00.

• This button cannot be clicked when the

player is not paused.

C. Select Player/Recorder button

• Selects the deck to be operated. The

player is forcibly selected when no
recorder is connected to the JLIP.

• This button cannot be clicked when

there is no JLIP recording equipment.

A B

C

Summary of Contents for JLIP VIDEO CAPTURE

























































Reviews: