JVC GZ-RX510, Detailed User Manual

Page: 12 / 164

Using the Touch Screen
The LCD monitor of this unit is a touch panel which enables operations by
touching the screen.
Icon operation buttons, thumbnails, and menu items are displayed on the
touch screen according to the mode in use.
0 There are two ways to operate the touch screen, namely “tap” and “drag”.
The following are some examples.
A
Tap the displayed button (icon) or thumbnail (file) on the touch screen
to make selection.
B
Drag the thumbnails on the touch screen to search for the desired file.
.
Memo :
0 The touch screen of this unit is pressure-sensitive. When the touch screen
does not respond smoothly, apply slightly more force to your fingertip.
0 Tap the buttons (icons) on the touch screen accurately. The buttons may
not respond if they are not tapped on the right area.
0 Do not press or rub with excessive force.
0 Do not operate the touch screen using an object with a sharp tip.
0 Pressing two or more places at a time may cause a malfunction.
0 Perform “TOUCH SCREEN ADJUST” if the reactive area of the screen is
misaligned with the touched area. (Adjust by lightly tapping with a corner
of an SD card, etc. Do not press with an object with a sharp tip or do not
press hard.)
“Adjusting the Touch Panel” (
A
p. 13)
0 You cannot operate the touch screen under water. Lock the screen to
prevent operation errors.
“Shooting under Water” (
A
p. 35)
Locking the Screen (when Shooting Underwater)
Lock the screen before using this unit underwater to prevent operation errors
on the touch screen.
0 Once the screen is locked, operations on the touch screen are disabled.
0 The START/STOP (recording) button and the zoom lever can be used
while the screen is locked.
0 You can set for both video and still image modes.
0 If “SCREEN LOCK” has been set, it will take a longer time for the unit to
power off after closing the LCD monitor.
o
Setting the “SCREEN LOCK”
A
Check that the unit is in the recording mode.
B
Tap “MENU”.
C
Tap “RECORD SETTING”.
D
Tap “SCREEN LOCK”.
0 The
L
button appears on the screen.
.
o
To cancel “SCREEN LOCK”
Tap the
L
button.
Memo :
0 Once “SCREEN LOCK” is set, only the
L
button on the touch screen can
be operated.
0 “SCREEN LOCK” cannot be set for the following cases:
- during recording
- when “TIME-LAPSE RECORDING” or “DATE/TIME RECORDING” has
been set
Getting Started
12