Using the Silent Mode
When the Silent mode is used, the LCD monitor darkens and operation
sounds will not be output. Use this mode to record quietly in dark places such
as during a performance.
0
T
appears when “SILENT MODE” is set to “ON”.
o
Operating procedure
A
Tap “MENU”.
0
The top menu appears.
B
Tap “SILENT”.
.
OFF
TOP MENU
SILENT
INFO.
C
Tap “ON”.
.
OFF
ON
SILENT MODE
Useful Settings for Recording
0
When “AUTO POWER OFF” is set to “ON”, this unit turns itself off
automatically to conserve power when it is not operated for 5 minutes.
(only when using the battery pack)
“ AUTO POWER OFF ” (
A
p. 115)
0
When “TOUCH PRIORITY AE/AF” is set to “FACE TRACKING”, this unit
detects faces and automatically adjusts its brightness and focus to record
the faces more clearly.
“Capturing Subjects Clearly (TOUCH PRIORITY AE/AF)” (
A
p. 34)
0
When “SEAMLESS RECORDING” is set to “ON” with two SD cards
inserted, recordings can be made to the other media without stopping
when the remaining recording time on current recording media runs out
or when error occurs on the current recording media.
“SEAMLESS RECORDING (Seamless recording/Auto recovery recording)”
(
A
p. 106)
0
When progressive (50p) recording is set, high quality images with a
smooth depth of field can be recorded. In addition, fast-moving subjects
can also be captured sharply without flickering.
“System Select” (
A
p. 104)
Caution :
0
Do not expose the lens to direct sunlight.
0
Do not use this unit in the rain, snow, or places with high humidity like the
bathroom.
0
Do not use this unit in places subject to excessive humidity or dust, as well
as places exposed to steam or smoke directly.
0
The power may turn off to protect the circuit if the temperature of this unit
rises too much.
0
When recording is performed with one battery pack attached, you can
attach the other battery pack without stopping the recording.
0
If two battery packs are attached, detaching one battery pack does not
turn off the power when one or both battery packs contain sufficient
batttery charge.
0
Do not remove the AC adapter or SD card when the access lamp is lighted.
The recorded data may become unreadable.
0
Do not turn off the camera when the access lamp is lighted. The recorded
data may become unreadable.
0
This unit is a microcomputer-controlled device. Electrostatic discharge,
external noise and interference (from a TV, a radio, etc.) might prevent it
from functioning properly. In such a case, turn off the power, then remove
the AC adapter and battery pack. This unit will be reset.
0
Videos that are recorded in the 50p mode (when “SYSTEM SELECT” is
set to “50p”) are playable only on AVCHD Progressive compatible
devices.
“System Select” (
A
p. 104)
0
Disclaimer
- We shall not be held responsible for loss of recorded contents when
recording videos/audio or playback cannot be operated due to
malfunctions in this unit, provided parts, or SD card.
- Once deleted, recorded contents (data), including data loss due to
malfunctions in this unit, cannot be restored. Please be forewarned.
- JVC will not be responsible for any lost data. Please be forewarned.
- In order for quality improvement, defective recording medium is subject
to be analyzed. Therefore, it may not be returned.
Memo :
0
Check the remaining recording time in the media before you start shooting.
If there is not enough space, move (copy) the data to a computer or disc.
0
When there are many files in the media, it may take time for them to be
displayed on the playback screen. Wait for a while as the access lamp
appears blinking, which indicates normal operation.
0
Do not forget to make copies after recording!
0
Recording stops automatically as it cannot be performed for 12 or more
consecutive hours according to specifications.
(It may take some time to resume recording.)
0
For long recordings, the file is split into two or more files if the size exceeds
4 GB.
0
1000 videos (**000.mts to **999.mts) can be recorded.
0
You can connect this unit to the AC adapter to record for long hours
indoors.
0
Depending on the shooting conditions, the four corners of the screen may
appear dark, but this is not a malfunction. In this case, change the shooting
conditions by moving the zoom lever, etc.
Recording
22
