JVC GY-HM620U/GY-HM620E Basic Instructions Download

Page: 44 / 48

Software License

Agreement

The software embedded in the Product (hereinafter

the “Licensed Software”) provided by

JVC

KENWOOD Corporation (hereinafter the

“Licensor”) is copyrighted to or sublicensable by

the Licensor, and this Agreement provides for the

terms and conditions which Users shall follow in

order to use the Licensed Software. The User shall

use the Licensed Software by agreeing with the

terms of this Software License Agreement. This

Agreement shall be deemed completed at the time

the User (hereinafter the “User”) initially used the

Product in which the “Licensed Software” is

embedded.

The Licensed Software may include the software

which has been licensed to the Licensor directly or

indirectly from any third party. In such case, some

third parties require the Users to follow their

conditions for use separately from this Software

License Agreement. Such software shall not be

subject to this Agreement, and the Users are urged

to read the “Important Notice concerning the

Software” to be provided separately.

Article 1 General Provision

The Licensor shall grant to the User a non-

exclusive and non-transferable (other than the

exceptional case referred to in Article 3, Paragraph

1) licensed to use the Licensed Software within the

country of the User (the country where the User

bought the Product (hereinafter the “Country”)).

Article 2 License

1. The license granted under this Agreement shall

be the right to use the Licensed Software in the

Product.

2. The User shall not duplicate, copy, modify, add,

translate or otherwise alter, or lease the Licensed

Software and any related documents, whether in

whole or in part.

3. The use of the Licensed Software shall be limited

to personal purpose, and the Licensed Software

shall not be distributed, licensed or sub-licensed

whether it is for commercial purpose or not.

4. The User shall use the Licensed Software

according to the directions described in the

operation manual or help file, and is prohibited to

use or duplicate any data in a manner violating the

applying whole or a part of the Licensed Software.

Article 3 Conditions for Grant of License

1. When the User transfers the Product, it may also

transfer the license to use the Licensed Software

embedded in the Product (including any related

materials, updates and upgrades) on condition that

no original, copies or related materials continue in

the possession of the User, and that the User shall

cause the transferee to comply with this Software

License Agreement.

2. The User shall not carry out reverse engineering,

disassembling, decompiling or any other code

analysis works in connection with the Licensed

Software.

Article 4 Right pertaining to the Licensed

Software

1. Any and all copyrights and other rights pertaining

to the Licensed Software and related documents

shall belong to the Licensor or the original holder

of the right who granted to the Licensor the license

or sublicense for the Licensed Software

(hereinafter the “Original Rightholder”), and the

User shall not be entitled to any right other than the

license granted hereunder, in respect of the

Licensed Software and any related documents.

2. The User shall, whenever the User uses the

Licensed Software, comply with any laws relating

to the copyright and other intellectual property

rights.

Article 5 Indemnification of Licensor

1. Neither the Licensor nor the Original Rightholder

shall be liable for any damage incurred by the User

or any third party due to the exercise of the license

granted to the User under this Agreement, unless

otherwise restricted by law.

2. The Licensor will offer no guarantee for the

merchantability, convertibility and consistency with

certain objective of the Licensed Software.

Article 6 Liability to Third Party

If any dispute has arisen with any third party due to

an infringement upon a copyright, patent or any

other intellectual property right that was caused by

the User’s use of the Licensed Software, the User

shall settle such dispute at the User’s own cost and

hold the Licensor and the Original Rightholder

harmless from any inconvenience it may cause.

Article 7 Confidentiality

The User shall keep the confidentiality of such

portion of the Licensed Software, related

documents thereof or any other information to be

granted under this Agreement, as well as the

conditions of this Agreement as has not yet entered

the public domain, and shall not disclose or divulge

the same to any third party without approval of the

Licensor.

Others

Summary of Contents for GY-HM620U/GY-HM620E

















































Search results

Summary of Contents for GY-HM620U/GY-HM620E

Reviews:

Related manuals for GY-HM620U/GY-HM620E

Brands by name

Popular brands

JVC GY-HM620U/GY-HM620E, Basic Instructions

Search results

Summary of Contents for GY-HM620U/GY-HM620E

Reviews:

Related manuals for GY-HM620U/GY-HM620E

Brands by name

Popular brands