Loading Clips to the PC
0
You can load clips to a PC by connecting the
camera recorder to the PC via the USB port.
Doing so enables clips stored in the SD card to
be managed and edited on the PC.
0
Files on the SD card can be managed/edited on
the connected PC in this mode only for USB
mass storage class devices that are recognized
by the said PC as a peripheral drive.
Memo :
0
Files cannot be written to the SD card.
0
Make sure to manage/edit files recorded in the
MP4 file format using the (JVC ProHD Clip
Manager) PC application software in the
supplied disc.
0
For details on how to install the application
software, refer to the [User's Guide] of the [JVC
ProHD Clip Manager] inside the supplied disc.
1
Connect the camera recorder to the PC
using a USB cable.
A confirmation message “Change to USB
Mode?” to enable the USB connection appears.
.
AUX
INPUT2
INPUT1
DEV
ICE
AV
A
BATT.RELE
ASE
POWER
/CHG
B
HDMI
REMO
TE
DC
HD/SD
SDI
REC
HOST
AV
DEVICE
PC
2
Select [Change] using the cross-shaped
button (
JK
), and press the Set button (
R
).
The camera recorder switches to USB mode.
.
2
Memo :
0
If recording is in progress, the “Change to USB
Mode?” message appears after recording
stops.
0
If playback is in progress, the camera recorder
switches to USB mode after the file closes
automatically, such as when playback stops.
Disconnecting
0
Disable the connection on the PC, then remove
the USB cable from the camera recorder.
0
Doing so exits the USB mode and switches the
camera recorder to Camera mode.
Memo :
0
The procedure for disabling the USB connection
varies according to the PC in use. For details,
refer to the “INSTRUCTIONS” of the PC.
24
Con
nectin
g Externa
l Devices
Summary of Contents for GY-HM620U/GY-HM620E
Page 47: ...47 ...
