50
SHOOTING OPERATION
HEADER REC Function
When the REC/VTR trigger button is pressed while the STOP button is pressed, this function first records the color bar video and
the test tone (1 kHz sine-wave) of the built-in signal generator at the beginning of the tape. Then it records the black video signal
and the mute audio signal for the duration specified in advance. When the recording is completed, the unit enters the Record-
Standby mode. The time code value at the Record-Standby position becomes the time code specified in advance. (HEADER
REC function)
• Settings related to the HEADER REC function, such as whether the HEADER REC function should be enabled, the HEADER
REC execution duration, and the time code value setting when the HEADER REC recording is completed, etc., are made on
the HEADER REC menu screen.
• The HEADER REC function is executed under the following circumstances:
CAM/VTR button: Set to CAM mode.
In the Record-Standby or Stop mode
HEADER REC menu screen contents
Item
Function/Initial Setting
START KEY
Sets whether the HEADER REC operation should be executed when the REC/VTR trigger button is pressed while the
STOP button is pressed.
DISABLE
: HEADER REC operation is not executed.
STOP+REC
: HEADER REC operation is executed.
TC DATA
Sets the time code value for the point when the Record-Standby mode is engaged following completion of HEADER
REC.
EXECUTE
: Confirms the set time code.
ZERO PRESET: Resets all time codes to zero “0”.
CANCEL
: Clears the set time code.
The frame mode is set depending on the setting in the DROP/NON DROP item on the TC/UB/CLOCK menu screen.
* The time code value at the point when the Record-Standby mode is engaged may differ some frames from the value
set for this item.
UB DATA
Sets the user’s bits of the HEADER REC section.
EXECUTE
: Confirms the set user’s bits.
ZERO PRESET: Resets all user’s bits data to zero “0”.
CANCEL
: Clears the set user’s bits.
MEMO
The user’s bits for the normal recording section are set on the TC/UB/CLOCK menu screen.
BARS TIME
Sets the duration (seconds) in which the color bar signal and test tone (1 kHz) is recorded during HEADER REC. (1-sec
steps)
[Initial Setting: 0SEC - 30SEC - 99SEC]
BLACK TIME
Sets the duration (seconds) in which the black signal is recorded during HEADER REC. (1-sec steps)
[Initial Setting: 0SEC - 30SEC - 99SEC]
PAGE BACK
The TC/UB/CLOCK menu screen returns when the SHUTTER dial is pressed.
Tape beginning
HEADER REC
Record-Standby mode
Normal recording
(Example) 30 sec
(Example) 30 sec
Color bar video signal
Test tone (1 kHz)
(Setting range: 0 to 99 sec)
Black video signal
Mute audio (No sound)
(Setting range: 0 to 99 sec)
Time code, user’s bits recording
Time code, user’s bits recording
Time code:
The value specified on the HEADER
REC menu screen- HEADER REC time
(Example) 23:59:00:00
Time code:
The value specified on the HEADER
REC menu screen.
(Example) 00:00:00:00
User’s bits:
The value specified for the UB
DATA item on the HEADER REC
menu screen.
User’s bits:
The value specified for the UB
PRESET item on the TC/UB/
CLOCK menu screen.
(only when set to REC RUN or
FREE RUN mode)
e_hd100.book Page 50 Thursday, July 14, 2005 5:28 PM
Summary of Contents for GY- HD101
Page 2: ......
