34
PREPARATIONS FOR OPERATION
Turning the Power ON
Turning the Power ON
1.
Set the POWER switch to ON.
The unit turns on in Camera mode.
The operation differs according to whether the unit is in the
Camera mode or in the VTR mode.
The mode switches each time you press the CAM/VTR
button.
When the mode is switched, the VTR indicator displays the
following statuses.
Camera mode
The GY-HD100 enters the Camera mode. The camera
image is displayed in the viewfinder or on the LCD monitor.
When a recordable videocassette is loaded, the GY-HD100
enters the record-standby mode automatically. “STBY” is
displayed in the VTR operation mode indication area of the
LCD monitor or in the viewfinder. In this condition, press
the REC/VTR trigger button to start recording.
* Playback is also possible in the Camera mode.
Playback operation becomes possible when the STOP
button is pressed to set the VTR operation mode indica-
tor to indicate “STOP”.
VTR mode
The GY-HD100 enters the VTR mode. The camera image
will not be displayed in the viewfinder or on the LCD moni-
tor. When a videocassette is loaded, the GY-HD100 enters
the stop mode.
“STOP” is displayed in the VTR operation mode indication
area of the LCD monitor or in the viewfinder.
HDV/DV input is possible through the IEEE1394 connector.
(GY-HD100U/GY-HD101E only)
Turning the Power OFF
1.
Place the GY-HD100 in the record-standby or STOP
mode.
2.
Set the POWER switch to OFF.
3.
Remove the battery pack or the power supply to the DC
IN connector. (When the camera is not going to be used
for a longer period.)
CAUTION
• Do not set the POWER switch to OFF while recording is
taking place.
Confirm that the “STBY” or “STOP” indication is shown in
the VTR operation mode indication area before the power
is turned off.
Should the POWER switch accidentally be set to OFF
during a recording, wait at least 5 seconds before turning
the power on again.
• Always set the POWER switch to OFF before disconnect-
ing the power supply.
Do not turn the battery pack or AC power supply OFF
while the POWER switch on the camera is still set to ON.
VTR
CH-1 BOTH CH-2
MONITOR SELECT
DISPLAY
ON OFF
FULL AUTO
ProHD
USER 3
USER 2
USER 1
STATUS
MENU
SHUTTER
2
1
OFF
ND FILTER
REC
OFF
ON
POWER
VF BRIGHT
WHT.BAL
AUTO
AUDIO
LEVEL
AUTO
CH-1
CH-2
CH-2
CH-1
-
+
AUDIO SELECT
MANU
AUTO
TC
LCD BRIGHT
DISPLAY
TC
UB
FREE
REGEN
GENE.
REC
CAM/VTR
VTR indicator
POWER switch
CAM/VTR button
While the mode is being switched : Flashing
In VTR mode
: Lit
In Camera mode
: Off
e_hd100.book Page 34 Thursday, July 14, 2005 5:28 PM
Summary of Contents for GY- HD101
Page 2: ......
