JVC GY- HD101 Instruction Manual Download Page 36 | Manualshive

Page: 36 / 96

background image

32

PREPARATIONS

Battery Operation

Charging the Battery Pack

Before use the battery pack should be charged using the pro-
vided AC Adapter.
* Be sure to pull the DC cable out of the AC adapter when

you charge the battery.

1.

Plug the AC cable of the AC Adapter into an AC outlet.
The POWER lamp illuminates.

2.

While pushing the battery pack down, slide it in the direc-
tion of the arrow to mount it on the AC Adapter. Charging
starts, and the CHARGE lamp blinks green. It changes to
light steadily when charging is completed.

3.

When charging is completed, remove the battery pack by
sliding it in the opposite direction of the mounting direc-
tion.

Attaching the Battery Pack on the GY-
HD100

If the DC cable is connected to the GY-HD100, unplug the
cable.

1.

Hold the battery pack with the connector side facing the
GY-HD100.

2.

While pressing the battery pack against the GY-HD100,
slide it downward to attach it to the GY-HD100.

Detaching the Battery Pack from the GY-
HD100

Ensure that the POWER switch on the GY-HD100 is set to
OFF.

1.

While sliding the battery pack lock release lever, slide the
battery pack upward to remove it.

CAUTION

Do not detach the battery pack while recording is taking
place.

MEMO

• Do not connect or disconnect the DC cable while operat-

ing with a battery pack.
The following symptoms may occur if the DC cable is
connected or disconnected while operating with a battery
pack.
• The power is cut off for a moment when the DC cable is

disconnected.

• Noise to the video and audio signals occurs. Audio sig-

nal are muted.

• When operation is continued with DC input after the bat-

tery pack capacity has been used up, set the POWER
switch to OFF after the DC power is applied. Then switch
ON again.

• If the GY-HD100 is left with the battery pack attached, a

small amount of power is consumed even if the POWER
switch on the GY-HD100 is set to OFF.
Remove the battery pack when the GY-HD100 is not
going to be used.

AC cord

AC outlet

Battery pack

AC adapter

CHARGE lamp 1

POWER lamp

CHARGE lamp 2

Battery

pack

Connector

Lock release lever

e_hd100.book Page 32 Thursday, July 14, 2005 5:28 PM

«
...
34
35
36
37
38
...
»

Summary of Contents for GY- HD101

































































































Reviews:

No comments

Related manuals for GY- HD101

Brand: Canon Pages: 200

TiltTrigger Pro-SQ

Brand: Tiffen Pages: 1

Handycam DCR-PC110

Brand: Sony Pages: 168

Digital Palmcorder PalmSight PV-DV100-K

Brand: Panasonic Pages: 68

Digital Palmcoder PalmSight PV-DV900

Brand: Panasonic Pages: 70

Digital Palmcoder PalmSight PV-DV900

Brand: Panasonic Pages: 72

Digital Palmcoder PV-DV103

Brand: Panasonic Pages: 76

Digital Palmcoder PalmSight PV-DV100

Brand: Panasonic Pages: 72

Digital Palmcoder PalmSight PV-DV100

Brand: Panasonic Pages: 76

Digital Palmcorder PalmSight PV-DV200-K

Brand: Panasonic Pages: 84

Digital Palmcorder PalmSight PV-DV600

Brand: Panasonic Pages: 92

Digital Palmcoder PalmSight PV-DV200

Brand: Panasonic Pages: 89

Digital Palmcoder PalmSight PV-DV200

Brand: Panasonic Pages: 92

Digital Palmcorder PV-DV102

Brand: Panasonic Pages: 116

Digital Palmcorder PV-GS13

Brand: Panasonic Pages: 152

Digital Palmcorder PV-GS150

Brand: Panasonic Pages: 176

Digital Palmcorder PV-DV101

Brand: Panasonic Pages: 289

Digital Photo Printer DPP-EX7

Brand: Sony Pages: 296

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands