12
CONTROLS, INDICATORS AND CONNECTORS
Rear Section
1
Back tally lamp
This lamp lights up when the GY-HD100 enters the record
mode. It blinks during the transition to the record mode.
When the tape has run out, or the VTR enters the warning
mode, it blinks quickly.
• Use the BACK TALLY item on the OTHERS [1/2] menu
screen to select whether or not the lamp should light and
the lighting pattern.
X
See page 77.
2
[PHONES] Earphone jack
This is a stereo mini-jack for connecting an earphone for
audio monitoring. Plug in an earphone or headphone with a
3.5 mm diameter plug. The earphone can also be used to
monitor alarm tones in accordance with the circumstances.
The audio channel to be output is selected with the AUDIO
MONITOR item on the AUDIO/MIC menu screen and
MONITOR SELECT switch
e
on page 18.
The audio output level is adjusted with the Audio monitor
volume control
3
on page 14.
MEMO
• The volume of the alarm sound is set with the ALARM VR
LEVEL item on the OTHERS [1/2] menu screen.
• When using a stereotype jack and stereo sound should
be output, the following setting should be performed.
Set the MONITOR SELECT switch
e
on page 18 to
BOTH.
Set the AUDIO MONITOR item on the AUDIO/MIC menu
screen to STEREO.
3
Shoulder belt hooks
Allows you to attach a separately sold shoulder belt.
4
LCD monitor
Shows a color camera image or the VTR playback picture.
It is also used for displaying the following:
• Menu Setting screens
• Characters showing the whether the GY-HD100 is set to
shooting mode or VTR playback mode
• Date and time and time code
• Audio level meter
• Warning indications, etc.
X
See page 19.
5
Tripod mount
Use this hole when mounting the camera onto a tripod.
(Use a screw shorter than 8 mm.)
Always make sure that the camera is securely mounted.
6
Rotation-preventive hole
Use this to prevent the camera from falling off the tripod.
Always make sure that the camera is securely mounted.
1
2
3
4
5
6
e_hd100.book Page 12 Thursday, July 14, 2005 5:28 PM
Summary of Contents for GY- HD101
Page 2: ......
