JVC GR GR-DV4000 Page 70 Instructions Manual Download

Page: 70 / 88

Master Page: Left

Advanced features

SYMPTOM

POSSIBLE CAUSES

CORRECTIVE ACTION

13.

The focus does not adjust
automatically.

13.

• Focus is set to the Manual

mode.

• The recording was done in a

dark place, or the contrast
was low.

• The lens is dirty or covered

with condensation.

13.

• Set Focus to the Auto mode.

(

墌

pg. 45)

• Clean the lens and check the

focus again. (

墌

pg. 77)

14.

In the 5-Second mode,
recording ends before
5 seconds have elapsed.

14.

• The 5-Second mode is set to

“Anim.” in MANUAL Menu.

14.

• Set “5S” to “5S” in MANUAL

Menu. (

墌

pg. 31, 36)

15.

Snapshot mode cannot be
used.

15.

• The Squeeze mode

(SQUEEZE) is selected.

15.

• Disengage the Squeeze

(SQUEEZE) mode.
(

墌

pg. 31, 36)

16.

The colour of Snapshot looks
strange.

16.

• The light source or the

subject does not include
white. Or there are various
different light sources behind
the subject.

• The Sepia (SEPIA) or

Monotone (MONOTONE)
mode is activated.

16.

• Find a white subject and

compose your shot so that it
also appears in the frame.
(

墌

pg. 23, 42)

• Disengage the Sepia (SEPIA)

and Monotone
(MONOTONE). (

墌

pg. 31,

33)

17.

The image taken using
Snapshot is too dark.

17.

• Shooting was performed

under backlit conditions.

17.

• Press

BACK LIGHT

(

墌

pg. 47)

18.

The image taken using
Snapshot is too bright.

18.

• The subject is too bright.

18.

• Set “

” to “SPOTLIGHT”.

(

墌

pg. 33)

19.

White Balance cannot be
activated.

19.

• The Sepia (SEPIA) or

Monotone (MONOTONE)
mode is activated.

19.

• Disengage the Sepia (SEPIA)

or Monotone (MONOTONE)
mode before setting White
Balance. (

墌

pg. 33)

20.

Wipe/Fader effects do not
work.

20.

• The Power Switch is set to

“

”.

20.

• Set the Power Switch to “

”.

(

墌

pg. 13)

21.

The Black & White Fader does
not work.

21.

• The Sepia (SEPIA) or

Monotone (MONOTONE)
mode is activated.

21.

• Disengage the Sepia (SEPIA)

and Monotone
(MONOTONE).
(

墌

pg. 31, 33)

22.

Program AE with special
effects does not work.

22.

• The Power Switch is set to

“

”.

22.

• Set the Power Switch to “

”.

(

墌

pg. 13)

23.

The image looks like the
shutter speed is too slow.

23.

• When shooting in the dark,

the unit becomes highly
sensitive to light when
“GAIN UP” is set to
“AUTO”.

23.

• If you want the lighting to

look more natural, set “GAIN
UP” to “AGC” or “OFF”.
(

墌

pg. 31, 35)

TROUBLESHOOTING (cont.)

GR-DV4000PAL.book Page 70 Friday, February 14, 2003 10:30 PM

Summary of Contents for GR GR-DV4000
























































































Search results

Summary of Contents for GR GR-DV4000

Reviews:

Related manuals for GR GR-DV4000

Brands by name

Popular brands

JVC GR GR-DV4000, Instructions Manual

Search results

Summary of Contents for GR GR-DV4000

Reviews:

Related manuals for GR GR-DV4000

Brands by name

Popular brands