manualshive.com logo in svg

JVC GR GR-DV4000, Instructions Manual

Share
Download
JVC GR GR-DV4000 Instructions Manual Download Page 51

EN

 

51

Master Page: Right

6

Press 

4

/

9

 to start video playback.

7

Press 

E-MAIL

 to engage the E-Mail Clip Record-

Standby mode.

●

“E-CLIP” appears.

●

To cancel E-Mail Clip Recording, press 

E-MAIL

 

again or press 

8

 to stop video playback.

8

At the point you want to start dubbing, press the 
Recording Start/Stop Button to start E-Mail Clip 
Recording.

9

Press the Recording Start/Stop Button to stop 
E-Mail Clip Recording.

●

“COMPLETED” is displayed, then the 
camcorder re-enters the E-Mail Clip Record-
Standby mode.

10

Press 

E-MAIL

 to end E-Mail Clip Recording. The 

normal screen reappears.

To view video clips stored in a memory card…

Refer to “Playback Of Video Clips” (

墌

pg. 25).

To delete unwanted video clips stored in a memory 
card…

Refer to “Deleting Files” (

墌

pg. 28).

NOTES:

●

Playback operation cannot be performed during 
E-Mail Clip Recording.

●

If the end of the tape is reached during E-Mail Clip 
Recording, that portion will be automatically 
stored in the memory card.

●

If the end of the tape is reached in step

7

, the 

E-Mail Clip Record-Standby mode will be 
automatically cancelled.

●

The video clip files stored with this camcorder are 
compatible with MPEG4. Some MPEG4 files 
stored with other devices cannot be played back 
with this camcorder.

●

The title image playback (TITLE) screen and the 
title index screen (

墌

pg. 25, 26) cannot be used 

during E-Mail Clip Recording.

●

Video noise may appear while viewing video clips 
in the LCD monitor or viewfinder, however, this 
noise is not present in the actual video clips stored 
in the memory card.

●

You can also view video clips on your PC by using 
Windows

®

 Media Player version 6.4 or later. Refer 

to the instructions of PC and software. 

A selection of titles/frames stored in the provided 
memory card can be superimposed.

Title Selection

1

Perform steps 

1

 to 

6

 in “Playback Of Title 

Images” (

墌

pg. 25).

2

Press 

INDEX

. The title index screen appears.

3

Rotate the 

MENU

 Wheel to select the desired 

title, and press it.

4

Set “TITLE W/” to the desired mode. 
(

墌

pg. 31, 38)

Title Recording

5

Press 

TITLE

 during recording. The selected title/

frame is recorded.

●

Press 

TITLE

 again to turn off the title/frame.

NOTES:

●

Title Impose can also be used for dubbing.

●

You can delete unwanted titles/frames (“Deleting 
Files” (

墌

pg. 28)) or protect important ones from 

accidental erasure (“Protecting Files” (

墌

pg. 27)).

●

A title/frame created on a PC can be transferred to 
a memory card using the provided software. 
Transferred titles/frames are displayed from title 
index number 12. They can be used together with 
the titles/frames in the provided memory card. For 
details on creating/transferring titles/frames, refer 
to the software instructions.

Title Impose

TITLE Button

INDEX Button

MENU Wheel

AD

V

A

NCED FE

A

TURE

S

GR-DV4000PAL.book  Page 51  Friday, February 14, 2003  10:30 PM

Summary of Contents for GR GR-DV4000

























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands