JVC GR GR-DV4000 Instructions Manual Download

Page: 25 / 88

Master Page: Right

You can view video clips (

墌

pg. 50) stored in the

memory card.

Load a memory card. (

墌

pg. 16)

Set the

VIDEO/MEMORY

Switch to “MEMORY”.

Set the Power Switch to “PLAY” while pressing
down the Lock Button located on the switch.

Open the LCD monitor fully, or pull out the
viewfinder fully.

●

The type of file (IMAGE, E-MAIL CLIP or TITLE)
which has been played back at the last time is
displayed.

If the image playback (IMAGE) or the title image
playback (TITLE) screen appears, press

SELECT

The MEMORY SELECT screen appears.

Rotate the

MENU

Wheel

to select “E-MAIL CLIP”,
and press it. The video clip
playback screen (E-MAIL
CLIP) appears.

Press

to select the

previous file. Press

select the next file.

●

Pressing

INFO

gives you details on the

displayed file. (

墌

pg. 26)

●

You can also look for the desired file using
Index Screen. (

墌

pg. 26)

To start playback, press

To stop playback, press

9 title images are pre-stored in the provided memory
card. You can view these files. The title images can
be also superimposed during recording. (

墌

pg. 51)

Load the provided memory card. (

墌

pg. 16)

Set the

VIDEO/MEMORY

Switch to “MEMORY”.

Set the Power Switch to “PLAY” while pressing
down the Lock Button located on the switch.

Open the LCD monitor fully, or pull out the
viewfinder fully.

●

The type of file (IMAGE, E-MAIL CLIP or TITLE)
which has been played back at the last time is
displayed.

If the image playback (IMAGE) or the video clip
playback (E-MAIL CLIP) screen appears, press

SELECT

. The MEMORY SELECT screen appears.

Rotate the

MENU

Wheel

to select “TITLE”, and
press it. The title image
playback screen (TITLE)
appears.

Press

to select the

previous file. Press

select the next file.

●

Pressing

INFO

gives you details on the

displayed file. (

墌

pg. 26)

●

You can also look for the desired file using
Index Screen. (

墌

pg. 26)

NOTE:

If the pre-stored title images in the provided memory
card have been deleted accidentally, you can copy
the image files from the provided CD-ROM. For
details, refer to the provided software’s instruction
manual included in the CD-ROM.

Playback Of Video Clips

E - M A I L C L I P

Playback Of Title Images

DIGIT

L STILL CAMERA (D.S

.C.)

RECORDING

PLA

GR-DV4000PAL.book Page 25 Friday, February 14, 2003 10:30 PM

Summary of Contents for GR GR-DV4000
























































































Search results

Summary of Contents for GR GR-DV4000

Reviews:

Related manuals for GR GR-DV4000

Brands by name

Popular brands

JVC GR GR-DV4000, Instructions Manual

Search results

Summary of Contents for GR GR-DV4000

Reviews:

Related manuals for GR GR-DV4000

Brands by name

Popular brands