JVC GR GR-DV4000 Instructions Manual Download

Page: 13 / 88

Master Page: Right

Set the Power Switch to “

” or “PLAY” while

pressing down the Lock Button located on the
switch.

Open the LCD monitor fully, or pull out the
viewfinder fully.

Press the

MENU

Wheel in. The Menu Screen

appears.

Rotate the

MENU

Wheel to select “

”, and

press it. The CAMERA DISPLAY Menu appears.

Rotate the

MENU

Wheel to select “BRIGHT”,

and press it. The Menu Screen closes and the
brightness control indicator appears.

Rotate the

MENU

Wheel until the appropriate

brightness is reached.

Press the

MENU

Wheel in.

●

It is also possible to adjust the brightness of the
viewfinder.

To turn on the camcorder, set the Power Switch to
any operation mode except “OFF” while pressing
down the Lock Button located on the switch.

Choose the appropriate operation mode according
to your preference using the Power Switch and

VIDEO/MEMORY

Switch.

Power-Linked Operation

When the Power Switch is set to “

” or “

”, you

can also turn on/off the camcorder by opening/
closing the LCD monitor or pulling out/pushing in
the viewfinder.

Brightness Adjustment Of The
Display

Operation Mode

BR I GHT

MENU Wheel

Power Lamp

VIDEO/MEMORY Switch

Power Switch

Lock Button

Power Switch Position

(Full Auto Recording):

Allows you to record using NO special effects or
manual adjustments. Suitable for standard
recording.
The “

” indicator appears on the display.

(Manual Recording):

Allows you to set various recording functions
using the Menus. (

墌

pg. 31)

If you want more creative capabilities than Full
Auto Recording, try this mode.
There is no indication on the display.

OFF

Allows you to switch off the camcorder.

PLAY:

●

Allows you to play back a recording on the tape.

●

Allows you to play back a video clip on the
memory card.

●

Allows you to display a still image stored in the
memory card or to transfer a still image stored in
the memory card to a PC.

●

Allows you to set various playback functions
using the Menus. (

墌

pg. 31)

VIDEO/MEMORY Switch Position

VIDEO:

Allows you to record on a tape or play back a
tape. If “REC SELECT” is set to “

”

(

墌

pg. 39), still images are recorded both on the

tape and the memory card.

MEMORY:

●

Allows you to record in a memory card or
access data stored in a memory card.

●

When the Power Switch is set to “

” or “

”, the

currently selected image size appears.

GETT

ING ST

TED

GR-DV4000PAL.book Page 13 Friday, February 14, 2003 10:30 PM

Summary of Contents for GR GR-DV4000
























































































Search results

Summary of Contents for GR GR-DV4000

Reviews:

Related manuals for GR GR-DV4000

Brands by name

Popular brands

JVC GR GR-DV4000, Instructions Manual

Search results

Summary of Contents for GR GR-DV4000

Reviews:

Related manuals for GR GR-DV4000

Brands by name

Popular brands