EN
63
Video Light
DANGER
䡲
The video light can become extremely
hot. Do not touch it either while in
operation or soon after turning it off,
otherwise serious injury may result.
䡲
Do not place the camcorder into the carrying case
immediately after using the video light, since it
remains extremely hot for some time.
䡲
When operating, keep a distance of about 30 cm
(11-13/16”) between the video light and people or
objects.
䡲
Do not use near flammable or explosive materials.
䡲
It is recommended that you consult your nearest
JVC dealer for replacing the video light.
General Battery Precautions
If the remote control is not functioning even if it is
being operated correctly, the batteries are ex-
hausted. Replace them with fresh ones.
Use only the following batteries:
AAA (R03) size x 2
Please make note of the following rules for battery
use. When misused, the batteries can leak or
explode.
1.
When replacing batteries, refer to page 40.
2. Do not
use any different size of batteries from those
specified.
3.
Be sure to install batteries in the correct direction.
4. Do not
use rechargeable batteries.
5. Do not
expose the batteries to excessive heat as
they can leak or explode.
6. Do not
dispose of the batteries in a fire.
7.
Remove the batteries from the unit if it is to be
stored for an extended period to avoid battery
leakage which can cause malfunctions.
CAUTIONS
When using the AC Power Adapter/Charger in
areas other than the USA
䡲
The provided AC Power Adapter/Charger features
automatic voltage selection in the AC range from
110 V to 240 V.
USING HOUSEHOLD AC PLUG ADAPTER
In case of connecting the unit’s power cord to an
AC wall outlet other than American National
Standard C73 series type use an AC plug adapter,
called a “Siemens Plug”, as shown.
For this AC plug adapter, consult your nearest JVC
dealer.
Plug adapter
Battery Packs
The supplied battery pack is a
lithium-ion battery. Before using
the supplied battery pack or an
optional battery pack, be sure to
read the following cautions:
1. To avoid hazards . . .
....
do not
burn.
....
do not
short-circuit the terminals. When
transporting, make sure the provided battery
cap is attached to the battery. If the battery cap
is misplaced, carry the battery in a plastic bag.
....
do not
modify or disassemble.
....
do not
expose the battery to temperatures
exceeding 60°C (140°F), as this may cause the
battery to overheat, explode or catch fire.
.... use only specified chargers.
2. To prevent damage and prolong service life . . .
....
do not
subject to unnecessary shock.
.... charge in an environment where temperatures
are within the tolerances shown in the chart
below. This is a chemical reaction type
battery—cooler temperatures impede chemical
reaction, while warmer temperatures can
prevent complete charging.
.... store in a cool, dry place. Extended exposure
to high temperatures will increase natural
discharge and shorten service life.
.... fully charge and then fully discharge the
battery every 6 months when storing the
battery pack over a long period time.
.... remove from charger or powered unit when
not in use, as some machines use current even
when switched off.
NOTES:
●
It is normal for the battery pack to be warm after
charging, or after use.
Temperature Range Specifications
Charging ............. 10°C to 35°C (50°F to 95°F)
Operation ........... 0°C to 40°C (32°F to 104°F)
Storage ............... –10°C to 30°C (14°F to 86°F)
●
Recharging time is based on room temperature of
20°C (68°F).
●
The lower the temperature, the longer recharging
takes.
Terminals
Summary of Contents for GR-DVL100
Page 70: ...MEMO ...
Page 71: ...MEMO ...