JVC GR-DVL100 Instructions Manual Download

Page: 53 / 72

SYMPTOM

POSSIBLE CAUSES

CORRECTIVE ACTION

16.

The picture wipe function
does not work.

17.

Scene transition does not
go as expected.

18.

The Video Echo mode
does not work.

19.

Even when Slow Shutter is
not selected, the image
looks like it is activated.

20.

There is no strobe when
the Classic Film or Strobe
mode is activated.

21.

White Balance cannot be
activated.

22.

When shooting a subject
illuminated by bright light,
vertical lines appear.

23.

When the screen is under
direct sunlight during
shooting, the screen
becomes red or black for
an instant.

•The Slow Shutter mode is

activated.

•“WIDE MODE” is not set to

“OFF”.

17.

•When using “Picture Wipe/

Dissolve” (

墌

pg. 26), there

is a delay of a fraction of a
second between the
previous record stop-point
and the Dissolve start-point.
This is normal, but this slight
delay becomes especially
noticeable when shooting
fast-moving subject or
during rapid panning.

18.

•The Picture Wipe or

Dissolve functions are in use.

•“WIDE MODE” is set to

“SQUEEZE” in the Menu
Screen.

•A Fade-In or Fade-Out is in

progress.

•When shooting in the dark,

the unit becomes highly
sensitive to light and the
image takes on an effect
similar to Slow Shutter.

20.

•The Picture Wipe or

Dissolve function is in use.

21.

•The Sepia or Monotone

mode is activated.

22.

•This is a result of exceed-

ingly high contrast, and is
not a malfunction.

23.

•This is not a malfunction.

16.

• Disengage the Slow Shutter

mode or set “WIDE MODE”
to “OFF” before preparing
to use the Picture Wipe
(

墌

pg. 24, 26, 28).

17.

————

18.

• Set “WIDE MODE” to

“CINEMA” or “OFF” mode
(

墌

pg. 24).

• Do not try to use the Video

Echo mode during a Fade-In
or Fade-Out (

墌

pg. 26, 28).

19.

• If you want the lighting to

look more natural, set GAIN
UP to “AGC” or “OFF” in
the Menu Screen
(

墌

pg. 23).

20.

• Do not try to use the Classic

Film or Strobe mode during
a scene transition
(

墌

pg. 26, 28).

21.

• Turn off Sepia or Monotone

before setting White
Balance (

墌

pg. 28, 30).

22.

————

23.

————

CONTINUED ON NEXT PAGE

Summary of Contents for GR-DVL100








































































Search results

Summary of Contents for GR-DVL100

Reviews:

Related manuals for GR-DVL100

Brands by name

Popular brands

JVC GR-DVL100, Instructions Manual

Search results

Summary of Contents for GR-DVL100

Reviews:

Related manuals for GR-DVL100

Brands by name

Popular brands