JVC GR-DVL100, Instructions Manual

Page: 52 / 72

52
EN
TROUBLESHOOTING
(cont.)
SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION
9. The color of Snapshot
looks strange.
10. The image taken using
Snapshot is too dark.
11. Digital Zoom does not
work.
12. Program AE with special
effects and Fade/Wipe
Effects do not work.
13. The Black & White Fader
does not work.
14. The Dissolve function does
not work.
15.
The Picture Wipe and
Dissolve functions do not
work.
9. • The light source or the
subject does not include
white. Or there are various
different light sources
behind the subject.
• The Sepia or Monotone
mode is activated.
10. • Shooting was performed
under backlit conditions.
11. • 10X optical zoom is
selected.
• “P.AE/EFFECT” is set to
“VIDEO ECHO” in the
Menu Screen.
• Picture Wipe or Dissolve are
being used in a scene
transition.
12. • The Power Switch is set to
“ ”.
13. • The Sepia or Monotone
mode is activated.
14. • The Sepia, Monotone or
Slow Shutter mode of
Program AE with special
effects is activated.
• “WIDE MODE” is set to
“SQUEEZE” in the Menu
Screen.
• The previously selected
mode of Program AE with
special effects was changed
after the last selected scene
for editing was registered.
15.
• The last selected editing
scene is ending.
• At the end of the last
selected scene for editing,
the Power Switch was set to
“OFF”.
• The power is off.
9. •Find a white subject and
compose your shot so that it
also appears in the frame
(
墌
pg. 16).
•Turn off Sepia and
Monotone (
墌
pg. 28).
10. •Press the BACKLIGHT
Button (
墌
pg. 29).
11. •Set “ZOOM” to “40X” or
“250X” in the Menu Screen
(
墌
pg. 23).
•Disengage the “VIDEO
ECHO” mode (
墌
pg. 18,
28).
•Wait until the Picture Wipe
or Dissolve effects are
completed (
墌
pg. 18, 26).
12. •Set the Power Switch to
“ ” (
墌
pg. 26, 28).
13. •Turn off Sepia and Mono-
tone (
墌
pg. 26, 28).
14. •Turn off Sepia, Monotone or
Slow Shutter before adding
Dissolve to a scene
transition (
墌
pg. 26, 28).
•Set “WIDE MODE” to
“CINEMA” or “OFF” mode
(
墌
pg. 24).
•Make sure you have
selected the mode of
Program AE with special
effects you want before
starting editing
(
墌
pg. 26, 28).
15.
•Select Picture Wipe or
Dissolve before beginning
recording. The effects are
then automatically activated
(
墌
pg. 26).
•Do not turn off the
camcorder’s power after
setting Edit-In and Edit-Out
points, as they will all be
erased (
墌
pg. 26).
•The camcorder automati-
cally shuts off after 5 minutes
have elapsed in the Record-
Standby mode. Make sure
you continue operations
within 5 minutes after
engaging Record-Standby
mode (
墌
pg. 26).