(No.YF124)1-7
3.2.2 ASSEMBLY/DISASSEMBLY OF CABINET PARTS AND ELECTRICAL PARTS
z
Disassembly procedure
NOTE1a:
Open the MONITOR ASSY, and then remove the screw
(No.7) which is next to the DV terminal.
NOTE1b:
When removing the UPPER ASSY, be careful in handling
the FPC.
Also, be careful in wiring the FPC when attaching the UP-
PER ASSY.
NOTE2a:
During the procedure, be careful in handling the SWITCH.
When attaching, leave the MONITOR ASSY open.
NOTE2b:
When attaching, be careful in wiring.
NOTE2c:
During the procedure, be careful not to lose KNOB(SLIDE).
NOTE5:
When attaching, be careful in wiring (SPEAKER).
NOTE7:
When attaching, be careful to avoid placing the WIRE (MIC)
on the front side, and make sure to place the WIRE (MIC) on
the connector.
NOTE8:
Pull out the GLIP BELT first.
NOET9a:
When removing the VF ASSY, pull out the FPC on the CCD
BOARD ASSY from the MAIN BOARD ASSY first.
NOTE9b:
When removing, pull out the FPC by lifting up the VF AS-
SEMBLY.
NOTE10:
During the procedure, release the LOWER CASE ASSY in
the direction of an arrow.
NOTE11:
During the procedure, be careful in handling the FPC.
NOTE12:
During the procedure, be careful not to damage the
SWITCH.
During the procedure, leave the CASS. COVER closed.
NOTE13:
When attaching, be careful to avoid any uplift or unevenness
of the CUSHION (OP).
z
Destination of connectors
UPPER ASSY
OPE PWB ASSY
COVER (HINGE)
MONITOR ASSY
SPEAKER
ZOOM UNIT
FRONT ASSY
CASS.COVER
VF ASSY
REAR COVER ASSY
LOWER CASE ASSY
REAR PWB ASSY
OP BLOCK ASSY
MAIN BKT ASSY
MAIN PWB ASSY
FRAME ASSY
STEP
No.
PART NAME
Fig.
No.
POINT
NOTE
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[10]
[11]
[12]
[13]
[14]
[15]
[16]
S1a,2(S1b),3(S1c),S1d
L1a,L1b,CN1
CN2a,b,c,S2a,4(S2b),KNOB(SLIDE)
2(S3)
2(S4),2(L4)
BKT.(HINGE),2(L5)
3(S6),L6
S7a,2(S7b),2(L7a),2(L7b),CN7
GRIP BELT,4(S8),3(L8)
CN9a,S9a,b,c,CN9b
S10a,b,c,L10a,b
2(S11),CN11
S12,L12,CN12
CN13,2(L13)
3(S14),L14a,b
CN15a,b,c,d,e,S15,L15a,b
4(S16)
FA1-1
FA1-2
FA2-1
FA2-2
FA2-3
FA2-4
FA3
FA4
FA5
FA6
FA7
FA8
FA9
FA10
NOTE1a
NOTE1b
NOTE2a,b,c
-
-
NOTE5
-
NOTE7
NOTE8
NOTE9a,b
NOTE10
NOTE11
NOTE12
NOTE13
-
-
-
CN1 MAIN
CN103 OPE
CN401 30
CN2a OPE
CN403
ZOOM UNIT
-
8
CN2b OPE
CN404
SPEAKER
-
2
CN2c OPE
CN402
MONITOR
CN7601 18/21
CN7
MAIN
CN2601
MIC
-
4
CN9a MAIN
CN4201
CCD
CN5001 20
CN9b MAIN
CN7801
VF
CN7001 24/23
CN11 REAR
CN502
POWER UNIT
-
7
CN12 MAIN
CN101
REAR
CN504 32
CN13 MAIN
CN4901
OP BLOCK
-
26
CN15a MAIN
CN1604
SENSOR
-
16
CN15b MAIN
CN1603
CAPSTAN MOTOR
-
18
CN15c MAIN
CN1602
DRUM MOTOR
-
11
CN15d MAIN
CN3501
HEAD
-
8
CN15e MAIN
CN1601
LOADING
MOTOR
-
8
ROTARY ENCODER SW
CN.
No.
PIN
No.
CONNECTOR
