manualshive.com logo in svg

JVC DV-180, Operation Manual, Page: 5 / 20

Share
Download
JVC DV-180 Operation Manual Download Page 5

2. 

DV-180 CONTROLLER SPECIFICATIONS: 

Operating Environment: ................................................... Indoor; contact factory for outdoor requirements 

Temperature:..................................................................... 40 to 104 degrees F. (0 to 40 degrees C.) 

Control Characteristics: 

 

Power................................................................... Rocker Switch, with LED indicator 

 

Pan/Tilt ................................................................ Joystick, proportional deflection 

 

Focus.................................................................... Seesaw control, proportional deflection 

 

Zoom.................................................................... Seesaw control, proportional deflection 

 

Presets.................................................................. 8 per camera station 

 

Number of Stations.............................................. 4 

 

Max. distance between controller & p/t head ...... 2000 feet 

Physical Characteristics: 

 

Size (surface mount)  ........................................... 9.75 (W) X 7.25 (D) inches; sloped chassis 

 

Weight ................................................................. 4 Pounds  

 Mounting ............................................................. Table-top 

Power Input Requirements: 

 Voltage................................................................. 12 

VDC 

 Current................................................................. 0.3 

Amperes 

 

Wall Mount Power Supply .................................. Provided with Controller 

Pan/Tilt Output Connector................................................ 4 conductor RJ-11 Jacks 

Computer Interface Connector.......................................... 15 pin D (female) 

 

JVC DV-180 PAN/TILT Operations Manual

   

 

Doc #: D0154-A

 

5

Summary of Contents for DV-180





















Reviews:

No comments