background image

Masterpage:Right+

EN

 

89

Filename [MV5S_13Subsidiary.fm]

SUBSIDIARY SETTINGS

Page 89Wednesday, 31 August 2005  16:55

Some DVD-RAM/RW discs are unformatted.
Format the disc when you use an unformatted disc or you want to 
delete all recordings and data on the disc.

Format A DVD-RAM Disc

1

Press 

DVD

 so that the DVD lamp lights up on the unit.

2

Press 

SET UP

 to access the Main Menu screen.

3

Press 

w e

 to select “DVD SET UP”, then press 

t

.

4

Press 

w e

 to select “UTILITY”, 

then press 

t

.

5

Press 

rt w e

 to select 

“FORMAT”, then press 

ENTER

Press 

w e

 to select “YES”, then 

press 

ENTER

.

6

Press 

w e

 to select “OK”, then 

press 

ENTER

.

Format A DVD-RW Disc

1

Perform steps 

1

 to 

4

 of “Format A DVD-RAM Disc” as above 

before continuing.

2

Press 

rt w e

 to select “FORMAT”, then press 

ENTER

. Press 

w e

 to choose “VR MODE” or “VIDEO MODE”, then press 

ENTER

 

when “DISC WILL BE FORMATTED” appears on the TV screen.
“VR MODE”: To be chosen when you want to record, erase, or edit 
data on the disc repeatedly.
“VIDEO MODE”: To be chosen when you want to erase all the data 
on the disc once played back to record new data, or play back the 
disc on other DVD players.

3

Press 

w e

 to select “YES”, then press 

ENTER

.

NOTES:

It is impossible to format Version 1.0 DVD-RW discs in Video mode.

It is impossible to format DVD-R discs.

All the titles on a disc will be deleted once the disc is formatted even if 
they are protected titles. (

pg. 67)

Format A Disc (DVD Deck Only)

ATTENTION:

When a disc is formatted, all recordings and data are erased. It is 
impossible to restore them.

Never turn off the unit or disconnect the AC power cord while 
“NOW FORMATTING...” is displayed on the TV screen.

Turn on the unit.

Turn on the TV and select the AV mode.

Slide the 

TV/DVD

 switch to 

DVD

.

Load a DVD-RAM/RW disc to format.

rtwe

ENTER

SET UP

DVD

SELECT WITH [CURSORS]
THEN PRESS [ENTER]

EXIT

OK

SELECT

SET UP

DVD SET UP

FUNCTION SET UP

INITIAL SET UP

LANGUAGE SET

AUDIO OUTPUT

UTILITY

FORMAT

FINALISE

CANCEL DISC FINALISATION

MV5S_00.book  Page 89  Wednesday, August 31, 2005  4:55 PM

Summary of Contents for DR-MV5BE





































































































Reviews: