Masterpage:Right+
EN
31
Filename [MV5S_08Basic TimerDub.fm]
TIMER RECORDING
Page 31Wednesday, 31 August 2005 16:55
You can programme each deck to timer-record as many as
8 programmes up to 30 days ahead.
If you do not know the S
HOW
V
IEW
number for the programme you
wish to record, use the following procedure to set your unit to
timer-record the programme.
NOTES:
●
When two successive programmes are recorded on a DVD-RW disc
with Manual Timer Programming function, the beginning of the
second one may be left off the recording.
●
If the copy limited programme is received during timer-recording, the
unit enters Record Pause mode. Recording starts again if it is
switched to a recordable broadcast during the time you programmed.
●
In case of a power failure after programming, the unit’s memory
backup keeps your selections for approximately 10 minutes.
●
Programmes that start after midnight must have the next day’s date.
●
To record the programmes received by the satellite receiver, record
on the DVD discs. For details, refer to “Satellite Receiver Users (DVD
Deck Only)” above.
1
Press
DVD
or
VHS
to select the deck on which you want to
perform timer programming.
2
For DVD deck
Load a recordable disc.
For VHS deck
Load a cassette with safety tab intact.
3
Press
PROG
to access the
Programme Check screen.
4
For DVD deck
Press
rt w e
to select “DVD”
and press
rt
to select “NEW
TIMER PROGRAMME”, then
press
ENTER
.
For VHS deck
Press
rt w e
to select “VHS”
and press
rt
to select “NEW
TIMER PROGRAMME”, then
press
ENTER
.
5
Press
rt
to set the desired
date.
●
The current date appears on the
TV screen. The date you enter
appears in its place.
6
Press
w e
to select “START”, then press
rt
to set the desired
start time.
●
Each press of
rt
advances/goes back the start time in 1-min.
increments.
●
To advance/go back the start time in 30-min. increments, press and
hold
rt
.
7
Press
w e
to select “STOP”, then press
rt
to set the desired
stop time.
●
Each press of
rt
advances/goes back the stop time in 1-min.
increments.
●
To advance/go back the stop time in 30-min. increments, press and
hold
rt
.
8
Press
w e
to select “TV PROG”, then press
rt
to select the
desired channel.
9
Press
w e
to select the desired recording option as required.
●
Refer to step
6
in “S
HOW
V
IEW
™ Timer Programming” (
墌
pg. 29).
10
Press
ENTER
to access the Programme Confirmation screen.
11
Press
ENTER
to complete timer programming.
●
To programme another timer, repeat steps
3
–
11
.
●
If “PROGRAMME OVERLAPPED” appears on the TV screen, see
page 35.
12
Press
TIMER
#
to engage the unit’s timer mode. The DVD
timer indicator lights up on the unit and the unit is automatically
turned off.
●
To disengage the timer mode, press
TIMER
#
again.
Manual Timer Programming
●
Make sure that the unit’s built-in clock is set properly.
●
Turn on the unit.
●
Turn on the TV and select the AV mode.
●
Slide the
TV/DVD
switch to
DVD
.
Satellite Receiver Users (DVD Deck Only)
To timer-record a satellite broadcast using Manual Timer
Programming:
A
Perform “Manual Timer Programming”.
B
Set the satellite receiver to the appropriate channel before
the selected programme begins.
C
Select “L-2” in step
8
.
D
Leave the satellite receiver’s power on.
rtwe
ENTER
DVD
VHS
TIMER
PROG
VHS
DVD
19:00 - 20:00
22:00 - 22:30
13:30 - 14:00
16:00 - 17:00
PROG
++++++++++++++++ NEW TIMER PRO+++++++++++++++
DISC TIMER PRGM
SELECT WITH [CURSORS]
THEN PRESS [ENTER]
OK
SELECT
EXIT
05/07 SAT
44
SP
10/07 THU
10
XP
11/07 FRI
26
LP
WEEKLY
11/07 FRI
33
LP
DATE
START-STOP
TV PROG
VPS/PDC REC MODE
DAILY/WEEKLY
ON
OFF
OFF
ON
LP
VTM 10
20:30
20:00
TIMER PROGRAMME
DATE
START
STOP
TV PROG
05/07 SAT
DAILY/WEEKLY
VPS/PDC
OFF
NAME
SET TIMER PROGRAMMING WITH [CURSORS]
THEN PRESS [ENTER]
REC MODE
CONFIRM
SELECT
PROG
EXIT
MV5S_00.book Page 31 Wednesday, August 31, 2005 4:55 PM
