Filename [MV5S_13Subsidiary.fm]
Masterpage:Left+
88
EN
SUBSIDIARY SETTINGS
Page 88Wednesday, 31 August 2005 16:55
1
Press
w e
to select “INITIAL SET UP”, then press
t
.
2
Press
w e
to select “CLOCK
SET”, then press
t
.
NOTE:
When you have selected
MAGYARORSZÁG,
C
ESKÁ
REPUBLIKA, POLSKA or OTHER
EASTERN EUROPE for the country
setting (
墌
pg. 19), you cannot use
Just Clock function. Skip steps
4
and
5
.
3
Press
rt
to select “YEAR”, then press
ENTER
. Press
rt
to
set the year, then press
ENTER
.
●
Repeat the same procedure to set the date and time. When you set
the time, press and hold
rt
to change the time by 30 minutes.
●
When you set the date, press and hold
rt
to change the date by 15
days.
4
Press
rt
to select “JUST CLOCK”, then press
ENTER
. Press
rt
to set to the desired mode, then press
ENTER
.
●
The default setting is “OFF”.
●
For the Just clock function, refer to “Just Clock” below.
●
If you set to “OFF”, you can disregard the next step as you won’t be
able to receive regular clock adjustments.
5
Press
rt
to select “TV PROGRAMME”, then press
ENTER
.
Press
rt
to set the channel position to the number representing
the station transmitting clock setting data, then press
ENTER
.
●
The unit is preset to receive clock setting and adjustment data from
channel position 1.
6
Press
SET UP
to start the clock operation.
NOTES:
●
Just Clock (when set to “ON”) adjusts the unit’s built-in clock every
hour, except for 23:00, 0:00, 1:00 and 2:00.
●
Just Clock is not effective when:
— the unit’s power is on.
— the unit is in the Timer mode.
— a difference of more than 3 minutes exists between the built-in
clock’s time and the actual time.
— the unit is in the Automatic Satellite Programme Recording
mode. (
墌
pg. 36) (DVD deck only)
— the unit is in the Power Save mode. (
墌
pg. 79)
— “L-2 SELECT” is set to “SAT VIDEO/RGB”. (
墌
pg. 45)
●
If Just Clock is set to “ON”, the unit’s clock is automatically adjusted
at the start/end of Summer Time.
●
Just Clock may not function properly depending on the reception
condition.
Just Clock
The Just Clock function provides accurate time keeping through
automatic adjustments at regular intervals, by reading data from a
PDC signal.
The Just Clock option can be set to “ON” or “OFF” at the Clock Set
screen (the default setting is “OFF”).
IMPORTANT:
If you turn off Just Clock, the accuracy of your unit’s built-in clock may
be reduced, which could adversely effect timer recording. We
recommend you to keep Just Clock on. In cases where the clock setting
data from a PDC signal is incorrect, however, you are advised to keep
Just Clock set to “OFF”.
Clock Set
IMPORTANT:
If you performed Auto Set Up (
墌
pg. 17) or Preset Download
(
墌
pg. 18), without ever having set the clock previously, the
unit’s built-in clock is also set automatically.
Perform the following steps only if —
— Auto Clock Set has not been performed correctly by Auto Set
Up or Preset Download.
OR
— you want to change Just Clock setting. (
墌
“Just Clock” in the
right column)
●
Turn on the unit.
●
Turn on the TV and select the AV mode.
●
Slide the
TV/DVD
switch to
DVD
.
ENTER
VHS
SET UP
DVD
SELECT WITH [CURSORS]
THEN PRESS [ENTER]
EXIT
OK
SELECT
SET UP
DVD SET UP
FUNCTION SET UP
INITIAL SET UP
AUTO CH SET MANUAL CH SET
GUIDE PR
CLOCK SET
YEAR
DATE
2005
05/07 (SAT)
TIME
18:56
JUST CLOCK
OFF
TV PROGRAMME
18
MV5S_00.book Page 88 Wednesday, August 31, 2005 4:55 PM
