JVC DR-MV5BE Instructions Manual Download

Page: 38 / 100

Filename [MV5S_08Basic TimerDub.fm]

Masterpage:Left+

EDITING

Page 38Wednesday, 31 August 2005 16:55

Dubbing A Part Of A Cassette

You can dub the selected scenes on a tape to the DVD disc,
starting and stopping wherever you wish.

For DVD deck

Load a recordable disc.

For VHS deck

Load a cassette you want to dub.

Press

VHS

]

to select the dubbing direction.

●

“

]

” lights up on the unit.

Set “VHS

]

DVD DUBBING” to “1 PROG”. (

墌

pg. 81)

Prepare the VHS deck for dubbing.

Press

VHS/DVD

on the unit repeatedly or

VHS

on the remote

control so that the VHS lamp lights up on the unit.

Locate the point from where you want to start dubbing, then

pause playback.

●

During still picture on the VHS deck, the images may jitter, but this is
not a malfunction.

Prepare the DVD deck for dubbing.

Press

VHS/DVD

on the unit repeatedly or

DVD

on the remote

control so that the DVD lamp lights up on the unit.

Press

REC MODE

repeatedly to set the recording mode.

Press and hold

, then press

so that the DVD deck enters

the Record Pause mode.

Press and hold

DUBBING

for more than 2 seconds to start

dubbing.

Press

to stop recording on the DVD deck.

●

Both the VHS deck and the DVD deck are stopped.

●

After dubbing is completed, press

VHS

]

so that “

]

” lights off. If it is

not done, recording on the DVD deck is not possible.

NOTES:

●

It is not possible to dub a tape with a copy protection signal.

●

If there is no remaining recording time left on a DVD disc, the tape
automatically stops at that position.

●

It is not possible to perform other operations like Live Memory
Playback. Check the recorded programme on the disc after dubbing.

Manual Dubbing (From VHS To DVD)

●

Turn on the unit.

●

Turn on the TV and select the AV mode.

●

Slide the

TV/DVD

switch to

DVD

●

Make sure that both the DVD deck and the VHS deck are in the
stop mode.

DVD

VHS

REC MODE

VHS/DVD

DVD

VHS

REC

VHS

DVD

DUBBING

DV IN

STANDBY/ON

S-VIDEO

VIDEO

AUDIO

VHS/DVD

DUBBING

VHS

MV5S_00.book Page 38 Wednesday, August 31, 2005 4:55 PM

Summary of Contents for DR-MV5BE





































































































Search results

Summary of Contents for DR-MV5BE

Reviews:

Related manuals for DR-MV5BE

Brands by name

Popular brands

JVC DR-MV5BE, Instructions Manual

Search results

Summary of Contents for DR-MV5BE

Reviews:

Related manuals for DR-MV5BE

Brands by name

Popular brands