Filename [DR-MH30EU_10Subsidiary.fm]
Masterpage:Left+
72
EN
SUBSIDIARY SETTINGS
Page 72
Thursday, 3 June 2004 10:46
Guide Program Number Set
1
Press
SET UP
to access the Main Menu screen.
2
Press
w e
to select “INITIAL SET UP”, then press
ENTER
.
3
Press
w e
to select “TUNER
SET”, then press
ENTER
.
4
Press
rt w e
to select “GUIDE
PROG SET”, then press
ENTER
.
5
Press
rt
to select “GUIDE
PROG”, then press
ENTER
.
6
Press
rt
to select the Guide
Program number for the desired
station as shown in the TV listings.
Then press
ENTER
.
●
To change the Guide Program
number in 10 increments, press and
hold
rt
.
7
Press
rt
to select “TV PROG”, then press
ENTER
. Press
rt
to select the number of the unit’s channel position on which the
Guide Program number’s broadcast is received by the unit or the
satellite receiver. Then press
ENTER
.
●
Pressing
AUX
changes “TV PROG” to “SAT”.
●
To timer-record a satellite programme with the VIDEO Plus+ system,
you need to install the provided Satellite Controller and perform the
procedure described in “Satellite Receiver Control Setting”
(
墌
pg. 25).
●
Repeat steps
5
–
7
as necessary.
8
Press
SET UP
to complete the setting.
Your unit needs to memorise all necessary stations in channel
positions in order to record TV programmes. Auto Channel Set
automatically assigns all receivable stations in your area to call
them up by using the
PR +/–
buttons without going through any
vacant channels.
Auto Channel Set
1
Press
SET UP
to access the Main Menu screen.
2
Press
w e
to select “INITIAL SET UP”, then press
ENTER
.
3
Press
w e
to select “TUNER SET”, then press
ENTER
.
4
Press
rt w e
to select
“AUTO CH SET”, then press
ENTER
.
●
When you have connected the unit
to a TV offering T-V Link via a
fully-wired 21-pin SCART cable
(
墌
pg. 19), the unit automatically
performs the Preset Download
and the T-V LINK screen will
appear. (
墌
pg. 21)
●
The Auto Set screen appears, and
remains on screen while the unit
searches for receivable stations.
VIDEO Plus+
®
System Setup
IMPORTANT:
Normally, Auto Set Up (
墌
pg. 20), Preset Download (
墌
pg. 21) or
Auto Channel Set (
墌
pg. 72) sets the Guide Program numbers
automatically. You need to set the Guide Program numbers manually
only in the following cases.
●
When timer-programming with the VIDEO Plus+ system, the
channel position, where the station you wish to record is received
on your unit, is not selected,
OR
when you add a channel after Auto Set Up, Preset Download or Auto
Channel Set has taken place,
—Set the Guide Program number for that station manually.
●
When you wish to timer-record a satellite programme with the
VIDEO Plus+ system,
—Set the Guide Program numbers for all satellite broadcasts received
on your satellite receiver.
●
Turn on the unit.
●
Turn on the TV and select the AV mode.
●
Slide the
TV/CABLE/SAT/DVD
switch to
DVD
.
Guide Program Number
“Guide Program (GUIDE PROG) number” refers to the assigned
TV station numbers, according to broadcast area, for the VIDEO
Plus+ timer recording. The Guide Program Numbers can be
found in most TV listings.
13
12
11
PRESS [SET UP] TO EXIT
ENTER
SELECT
EXIT
SET UP
SELECT WITH [ ] THEN PRESS [ENTER]
CLOCK SET
AUTO CH SET
GUIDE PROG SET
MANUAL CH SET
TUNER SET
DVD VIDEO SET UP
INITIAL SET UP
FUNCTION SET UP
HDD/DVD SET UP
SAT CONTROL SET
13
12
11
PRESS [SET UP] TO EXIT
ENTER
SELECT
EXIT
SET UP
SELECT WITH [ ] THEN PRESS [ENTER]
INITIAL SET UP > GUIDE PROG SET
TV PROG
GUIDE PROG
YLE2 1
1
RETURN
Tuner Set
●
Turn on the unit.
●
Turn on the TV and select the AV mode.
●
Slide the
TV/CABLE/SAT/DVD
switch to
DVD
.
IMPORTANT:
Perform the following steps only if —
— Auto Channel Set has not been set correctly by Auto Set Up
or by Preset Download. (
墌
pg. 20, 21)
— you have moved to a different area or if a new station starts
broadcasting in your area.
rtwe
ENTER
SET UP
CABLE/DBS
DVD
TV
13
12
11
PRESS [SET UP] TO EXIT
ENTER
SELECT
EXIT
SET UP
SELECT WITH [ ] THEN PRESS [ENTER]
CLOCK SET
AUTO CH SET
GUIDE PROG SET
MANUAL CH SET
TUNER SET
DVD VIDEO SET UP
INITIAL SET UP
FUNCTION SET UP
HDD/DVD SET UP
SAT CONTROL SET
PRESS [SET UP] TO EXIT
ENTER
SELECT
EXIT
SET UP
SELECT WITH [ ] THEN PRESS [ENTER]
INITIAL SET UP > AUTO SET
AUTO SET
PLEASE WAIT...
DR-MH30EU_00.book Page 72 Thursday, June 3, 2004 11:00 AM
