Masterpage:Right0
EN
69
Filename [DR-MH30EU_10Subsidiary.fm]
Page 69
Thursday, 3 June 2004 10:46
SUBSIDIARY SETTINGS
Various modes of this unit are categorized into menus nested in 2
levels shown in the following table. To change the settings of these
modes, find the desired mode in the menu (for details on each
menu, see pages 69 through 70), then follow the procedure below.
●
The procedure below shows how to set the desired option of the
“AUDIO REC” mode as an example.
1
Press
SET UP
to access the Main Menu screen.
2
Press
w e
to select “FUNCTION SET UP”, then press
ENTER
.
3
Press
w e
to select “REC/PLAY
SET UP”, then press
ENTER
.
4
Press
rt
to select “AUDIO
REC”, then press
ENTER
.
5
Press
rt
to select the desired
option, then press
ENTER
.
6
Press
SET UP
to complete the
setting.
* The
boldface
settings below indicate the settings at your purchase.
AUDIO OUTPUT
8
DIGITAL AUDIO OUT
—
DOLBY DIGITAL/PCM
/ STREAM/
PCM / PCM ONLY
Set to the appropriate mode according to the type of the device
connected to DIGITAL OUT connector.
DOLBY DIGITAL/PCM
: Select this when you connect the digital
input connector of a Dolby Digital decoder or an amplifier with a
built-in Dolby Digital decoder.
STREAM/PCM
: Select this when you connect the digital input
connector of an amplifier with a built-in DTS, Dolby Digital, or
MPEG multichannel decoder.
PCM ONLY
: Select this when you connect the linear PCM digital
input of other audio equipment (amplifier, MD or DAT deck, etc.).
8
ANALOG AUDIO OUT
—
STEREO
/ DOLBY SURROUND
Select the appropriate setting to accommodate the unit to the
connected A/V equipment. This function takes effect when a
DVD VIDEO disc is played back.
STEREO
: Select this when listening to conventional two-channel
stereo audio with the unit’s AUDIO OUT connectors connected
to a stereo amplifier/receiver or TV set, or in case you want to
record the audio from a DVD VIDEO disc to a Mini Disc, etc.
DOLBY SURROUND
: Select this when listening to multichannel
surround audio with the unit’s AUDIO OUT connectors
connected to an amplifier/receiver with a built-in surround
decoder or a surround decoder.
8
D. RANGE CONTROL
—
NORMAL
/ WIDE RANGE /
TV MODE
The dynamic range (the difference between the loudest sound and
the quietest one) can be compressed during playback of a
programme encoded in Dolby Digital format.
This function takes effect when a DVD VIDEO disc recorded in
Dolby Digital format is played back at low or middle volume.
NORMAL
: Normally select this setting to activate this function.
WIDE RANGE
: Select this to deactivate this function when you
enjoy wide dynamic range programme.
TV MODE
: Select this when you hear the sound through the TV’s
speaker(s).
NOTES:
●
This function takes no effect on programmes other than that recorded
in Dolby Digital format.
●
This function dose not work when Simulated Surround Effect is
activated. (
墌
pg. 34)
●
The effect of “NORMAL” and “WIDE RANGE” may not be different
depending on discs.
8
OUTPUT LEVEL
—
STANDARD
/ LOW
You can lower the output level of analog audio to accommodate the
unit to the connected A/V equipment.
STANDARD
: Normally select this setting.
LOW
: The output level of analog audio is lowered.
Mode Set
●
Turn on the unit.
●
Turn on the TV and select the AV mode.
●
Slide the
TV/CABLE/SAT/DVD
switch to
DVD
.
DVD VIDEO SET UP
LANGUAGE SET
(
墌
pg. 23)
AUDIO OUTPUT
(
墌
pg. 69)
PARENTAL LOCK
(
墌
pg. 36)
DISC PLAY SET UP
(
墌
pg. 70)
HDD/DVD SET UP
HDD SET UP
(
墌
pg. 70)
DVD SET UP
(
墌
pg. 70)
DISC SET UP
(
墌
pg. 76, 77)
FUNCTION SET UP
REC/PLAY SET UP
(
墌
pg. 70)
DISPLAY SET
(
墌
pg. 71)
VIDEO IN/OUT
(
墌
pg. 24, 63)
INITIAL SET UP
TUNER SET
(
墌
pg. 72)
CLOCK SET
(
墌
pg. 75)
rtwe
ENTER
SET UP
CABLE/DBS
DVD
TV
AUDIO REC
XP MODE REC AUDIO
NICAM
DOLBY DIGITAL
DIRECT REC
OFF
FUNCTION SET UP
PRESS [SET UP] TO EXIT
ENTER
SELECT
EXIT
SET UP
SELECT WITH [ ] THEN PRESS [ENTER]
DISPLAY SET
REC/PLAY SETUP
DVD VIDEO SET UP
INITIAL SET UP
HDD/DVD SET UP
VIDEO IN/OUT
CONECT
JUMP TIME
15 MIN
DR-MH30EU_00.book Page 69 Thursday, June 3, 2004 11:00 AM
