CH-X470RF
1-9
Unhook the elevator spring located on the front side
of the unit. (Be sure to first unhook the spring from
the lifter side as shown in the upper part of the
diagram.)
Lift the lifter unit upward, then remove the lower rod
to remove the lifter unit from the chassis.
1.
2.
Lifter unit (See Fig.19 and 20)
Remove the two lifter bracket fixing screws L located
on the back of the lifter unit.
Remove the lower rod.
1.
2.
Lifter bracket (See Fig.21)
Remove the two side bracket unit fixing screws M to
disconnect the side bracket unit from the lifter unit.
Remove the three shafts on the traverse mechanism
assembly from the lifter unit.
1.
2.
Side bracket and traverse mechanism
assembly (See Fig.22)
For reassembling, refer to the reassembling
procedures.
CAUTION:
Unhook this part first
Proper
orientation
Lift up the lifter unit
Lower rod
Remove from the lifter unit
Remove from the
lifter unit
Fig. 19
Fig. 20
Fig. 21
L
L
Fig. 22
M
M
Spring
Lifter unit
Lifter unit
Side bracket
Traverse mechanism
assembly
Lifter bracket
