CH-X470RF
1-8
Position the unit with the front section facing down.
Rotate the third gear located on the back of the main
unit in the direction of the arrow (clockwise).
Shift the rear slider in the direction of the arrow and
remove it at the rear slider mounting position (at the
widest hole).
1.
2.
Rear slider (See Fig.15)
Position the unit with the rear section facing down.
Rotate the third gear located on the bottom of the
unit in the direction of the arrow (clockwise) until the
front slider is shifted to the outermost position.
Remove the E-washer securing the front slider to
remove the front slider from the chassis
1.
2.
Front slider (See Fig.16)
Remove the nine screws K securing the top plate.
Disconnect the section e attached to the rear of the
unit, then lift the top plate slightly.
Slide the top plate toward the rear of the unit to
remove the upper rod from the top plate.
1.
2.
3.
Top plate (See Fig.17 and 18)
Can be removed at the stud position
(at the widest hole)
Remove
Shift
Third gear
Remove the E-washer
Third gear
Slide and remove the rod inside
Slide
Top plate
After lifting
e
Fig. 15
Fig. 16
Fig. 17
Fig. 18
K
K
K
Remove
K
Rear slider
Front slider
Rod
Top plate
