CH-X470RF
1-22
Tray extension
error
Tray-in switch time out
(Tray-in switch Low, Tray-out switch High)
Tray stops part way
E1 03 00 11
Tray stops part way
E1 03 00 12
Tray-out switch time out (Tray-in switch High,
Tray-out switch High)
Tray-in switch faulty or other defect
E1 03 00 13
Tray-in switch time out (Tray-in switch Low,
Tray-out switch Low)
Tray motor inoperative
E1 03 00 16
Tray-in switch time out (Tray-in switch Low,
Tray-out switch Low)
Tray retraction stops part way
E1 03 00 17
Tray-out switch time out (Tray-in switch High,
Tray-out switch High)
Tray-in switch faulty or other defect
E1 03 00 18
Tray-in switch time out (Tray-in switch Low,
Tray-out switch Low)
Magazine removed when tray partly r
etracted
E1 03 00 19
MAG-in switch Low to High
E1 03 00 47
Not stable at absolute position
Absolute position time out
E1 03 00 46
Both Tray-in and Tray-out Low
Mechanism switch time out
E1 02 00 43
Magazine not ejected
MAG in switch time out
E1 02 00 42
Eject position not attained
Eject position time out
E1 02 00 41
Position motor inoperative
Eject position time out
E1 02 00 38
Other fault
Wait position time out
E1 02 00 37
Position not stable in fine adjust mode
Wait position time out
E1 02 00 36
Position motor inoperative
Wait position time out
E1 02 00 33
Other fault
Play position time out
E1 02 00 32
Position not stable in fine adjust mode
Play position time out
E1 02 00 31
Position motor inoperative
Play position time out
E1 02 00 28
Other fault
Wait position time out
E1 02 00 27
Position not stable in fine adjust mode
Wait position time out
E1 02 00 26
Position motor inoperative
Wait position time out
E1 02 00 23
Other fault
Wait position time out
E1 02 00 22
Position not stable in fine adjust mode
Wait position time out
E1 02 00 21
Position motor inoperative
Wait position time out
E1 03 00 14
Magazine removed when tray partly
extende
MAG-in switch Low to High
Tray retraction
error
Lifter raise error
Lifter lower error
Chuck error
Unchuck error
Eject error
Initialize error
Generating condition
Description
Error code
CH-X470RF Error code
The following error codes can be displayed and stored in up to 3 memories when the KD-MX3000 is used with
the controller. Refer to the KD-MX3000 service manual regarding error code indication.
The error code indication when using the earlier controller is the same as the CH-X99,KD-MK88 and other
12CD changer models.
CH-1 error code table
Note: The 1st error code is indicated by E1, while the 2nd and 3rd error codes are respectively indicated by
E2 and E3.
