JVC CA-D602T Instructions Manual Download

Page: 18 / 48

Getting Ready To Use Dolby Pro Logic

Speaker Arrangements for Dolby Pro Logic ————————

Setting-up Dolby Pro Logic ————————————————

1. Press PRO LOGIC/3CH LOGIC to select PRO LOGIC.

Each time you press the button, Dolby Surround programs change as follows:

PRO LOGIC

3CH LOGIC

OFF

(back to the beginning)

When using the Remote Control, press SHIFT then press PRO LOGIC (1).
•

Perform the steps below using the buttons on the Remote Control.

2. Select the desired Center Speaker mode.

Press SHIFT on the Remote Control then press CENTER MODE (6).
Each time you press the button, Center Speaker modes change as follows:

NORMAL

WIDE

OFF

PHANTOM

(back to the beginning)

3. Select the Delay time.

Press DELAY TIME (9). Each time you press the button, Delay time changes as follows:

DELAY 2

DELAY 3

DELAY 4

DELAY 1

(back to the beginning)

4. Set the volume to the level you like.

5. Press TEST TONE (3).

A test tone comes out of the speakers in the following order:

LEFT

CENTER

RIGHT

REAR

(back to the beginning)

•

When a test tone comes out of the rear speakers, “SURROUND” appears on the display.

•

When “PHANTOM” or “OFF” is selected for Center Speaker mode, no test tone comes out of the
center speaker.

6. Adjust the level for the center speaker.

Press CENTER LEVEL + (5) or – (4). Set the level so that it is about
the same as the level from the front speakers.

•

You cannot adjust the level for the center speaker if “PHANTOM” or “OFF” is selected for
Center Speaker mode.

7. Adjust the level for the rear speakers.

Press REAR LEVEL + (8) or – (7). Set the level so that it is about
the same as the level from the front speakers.

8. Press TEST TONE (3) again.

Test Tone mode is canceled.
This completes the preparations required for using Dolby Pro Logic.

Layout when using the center speaker and
rear speakers

Layout when using the rear speakers

Front

Speaker

Front

Speaker

Center Speaker

Rear

Speaker

Rear

Speaker

Rear

Speaker

Rear

Speaker

Front

Speaker

Front

Speaker

SHIFT

PRO LOGIC

CENTER MODE

DELAY TIME

TEST TONE

CENTER

LEVEL

–

REAR

LEVEL

–

TEST TONE

EN/MX-D602T[J]/f

98.3.31, 2:25 PM

Summary of Contents for CA-D602T

















































Search results

Summary of Contents for CA-D602T

Reviews:

Related manuals for CA-D602T

Brands by name

Popular brands

JVC CA-D602T, Instructions Manual

Search results

Summary of Contents for CA-D602T

Reviews:

Related manuals for CA-D602T

Brands by name

Popular brands