JVC CA-D602T, Instructions Manual

Page: 31 / 48

29
Using the Cassette Deck
(Recording)
DISC
DISC
DISC
PROGRAM
/RANDOM
REPEAT
EDIT
CD REC START
REC START/STOP
DUBBING
FM AM
RM-SED602TU REMOTE CONTROL
VOLUME
+
–
TAPE A
AUX REC PAUSE
TAPE B DIRECTION REPEAT
SLEEP
SHIFT TEST TONE
CENTER MODE
DELAY TIME
L BALANCE R
CENTER
LEVEL
3CH LOGIC PRO LOGIC
S.A.BASS
SOUND
MODE
DISC 1
CD CONTROL TAPE CONTROL
DISC 2 DISC 3
FM MODE
– +
REAR
LEVEL
– +
POWER
REC PAUSE
Things to Know before You Start Recording ———————
It should be noted that it may be unlawful to re-record pre-recorded tapes, records, or
discs without the consent of the owner of copyright in the sound or video recording,
broadcast or cable program and in any literary, dramatic, musical, or artistic
embodied therein.
When you want to record onto both sides of a tape, you can set Reverse mode on to do so. However,
recording automatically stops after recording in the
2
direction in Reverse mode. Therefore, make
sure that the tape direction is
3
when recording with Reverse mode on.
The recording level, which is the volume at which the new tape is being made, is automatically set
correctly, so it is not affected by volume control. Thus, during recording you can adjust the sound you
are actually listening to without affecting the recording level.
Two small tabs on the back of the cassette tape, one for side A and one for side B, can be removed to
prevent accidental erasure or re-recording. To record on a cassette with the tabs removed, you must
cover the holes with adhesive tape first.
However, when a Type II tape is used, only cover part of the hole as shown, since the other part of the
hole is used to detect the tape type.
When recording, you can hear Sound Mode effects through the speakers or headphones. However, the
sound is recorded without Sound Mode effects.
Type I and Type II tapes can be used for recording.
Note:
At the start and end of cassette tapes, there is leader tape which cannot be recorded onto.
Depending on the recording source, the first part of the recording may be missing because of the leader.
When recording CDs or radio broadcasts, to get the beginning of the recording on the tape, first wind on
the leader before beginning recording.
Display
REC indicator
When the System is being used, the display shows other items as well.
However, we have only shown the items described in this section.
EDIT
EN/MX-D602T[J]/f 98.3.31, 2:25 PM 29