JVC CA-D602T, Instructions Manual

Page: 34 / 48

32
5. Press SET.
The tracks to be recorded on side B appear on the display.
• Each time you press the button, the tracks to be recorded on side A and side B appear on the
display alternately.
6. Insert a blank or erasable cassette in Deck B.
When you want to record on both sides of a tape, press REVERSE MODE to turn Reverse mode on.
7. Press CD REC START .
The Unit plays the CD and starts recording. If the tape has not been rewound, the Unit rewinds the
tape before starting to record the CD.
To stop at any time while recording, press
7
STOP or REC START/STOP on the Unit. If
7
STOP is
pressed, the Cassette Deck will create a four-second blank space after the CD Player stops. If REC
START/STOP is pressed, the CD Player and Cassette Deck will stop simultaneously. When
7
is pressed
on the Remote Control, the stop time of the CD Player and Cassette Deck vary according to their mode
(CD operation mode or Cassette Deck operation mode). If the Remote Control is in CD operation mode,
the Cassette Deck will stop four second after the CD Player stops. If the Remote Control is in Cassette
Deck operation mode, the CD Player and Cassette Deck will stop simultaneously.
To cancel Auto Edit, press PROGRAM/ RANDOM while the CD Player is stopped or press
0
for the
disc number being recorded.
Note:
When making Sleep timer settings while doing Auto Edit recording, set the time so that there is
enough leeway to finish the recording before the power goes off. If the time is set to about the length of
the CD, the power may go off before recording finishes.
Tape to Tape Recording (Dubbing)
Recording from one tape to another is called dubbing.
When dubbing tapes, make sure that the playback direction of Deck A and Deck B are the same.
When you record both sides of a tape, press REVERSE MODE to turn on the Reverse Mode.
It is preferable that the type of tape (Type I or Type II) you record from be the same as the type you
record onto.
How to Use DUBBING ———————————————————
1. Press TAPE
™ £
, then
7
STOP.
2. Insert the source cassette you want to copy from into Deck A for
playback.
Insert the cassette so that it will be played in the forward (
3
) direction.
3. Insert the blank or erasable cassette you want to copy onto into
Deck B for recording.
Insert the cassette so that it will be recorded in the forward (
3
) direction.
4. Press DUBBING.
Deck A and Deck B start simultaneously.
To stop dubbing,
press
7
STOP.
When dubbing, you can hear Sound Mode effects through the speakers or headphones. However, the
sound is dubbed without Sound Mode effects.
DUBBING
EN/MX-D602T[J]/f 98.3.31, 2:26 PM 32