13
1 Preparing and using for the first time
T
Place a receptacle (at least 300 ml) under the hot-water
nozzle.
T
Turn the switch to the
x
position.
‘Filter is being rinsed’
, water flows out of the coffee spout.
Rinsing of the filter stops automatically after approximately
300 ml.
‘Switch close’
appears on the display.
T
Turn the switch to the
°
position.
‘Filter rinsing complete’
‘System is filling’
, the system fills up with water.
‘Empty drip tray’
T
Empty the drip tray and coffee grounds container and put
them back into the machine.
‘Machine is rinsing’
, the system is rinsed. The rinse stops
automatically. Your JURA is ready for use.
E
The start screen shows the products you can prepare.
E
If the filter is active, this is indicated by a blue filter symbol at
the bottom of the display.
Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.
T
Only fill the water tank with fresh, cold water.
T
Press the
‘No filter’
button.
‘Saved’
appears briefly on the display.
‘Fill water tank’
T
Remove the water tank and rinse it with cold water.
T
Fill the water tank with fresh, cold water and reinsert the
tank.
‘Switch open’
First-time use without filter
cartridge activation
CAUTION
