16
2 Preparation
To prepare
two
speciality coffees, press the appropriate preparation
button twice (within approximately 1 second).
Example:
Proceed as follows to prepare two espressi.
Precondition:
The start screen is displayed.
T
Place two cups under the coffee spout.
T
Press the
‘Espresso’
button
twice
(within 1 second)
to start
preparation.
‘2 espressi’
, the preset amount of water flows into the cups.
Preparation stops automatically. Your JURA is once more
ready for use.
It is easy to permanently adjust the amount of water for all
single
products
to the cup size. Adjust the amount once as shown in the
following example. Every time you prepare a drink in the future, this
amount will be dispensed.
Example:
Proceed as follows to
permanently
set the amount of
water for one coffee.
Precondition:
The start screen is displayed.
T
Place a cup under the coffee spout.
T
Press and
hold
the
‘Coffee’
button until
‘Enough coffee?
Press button’
appears.
T
Release the
‘Coffee’
button.
Preparation starts and the coffee flows into the cup.
T
Press any button except
‘Cancel’
as soon as there is sufficient
coffee in the cup.
Preparation stops.
‘Saved’
appears briefly on the display. The
set amount of water for one coffee is permanently stored.
Your JURA is once more ready for use.
E
You can alter this setting at any time by repeating the above
procedure.
E
You can also permanently set the amounts for all single prod-
ucts in programming mode (see Chapter 4 ‘Permanent set-
tings in programming mode – Adjusting the product set-
tings’).
Two speciality coffees
Permanently setting the
amount of water for the
cup size
