17
2 Preparation
You can adjust the grinder on a continuous scale to suit the degree
of roast of your coffee.
If you adjust the consistency of grind when the grinder is not oper-
ating, the grinder adjustment switch could be damaged.
T
Only adjust the consistency of grind when the grinder is run-
ning.
The consistency of grind is correct if the coffee flows regularly from
the coffee spout. In addition a fine, thick crema forms.
Example:
Proceed as follows to change the consistency of grind
dur-
ing
the preparation of an espresso.
T
Place a cup under the coffee spout.
T
Open the cover of the grinder adjustment switch.
T
Press the
‘Espresso’
button to start preparation.
T
Turn the grinder adjustment switch to the desired position
while
the grinder is running.
The preset amount of water flows into the cup. Preparation
stops automatically.
T
Close the cover of the grinder adjustment switch.
There is a danger of scalding from hot water splashes.
T
Avoid direct contact with the skin.
Precondition:
The start screen is displayed.
T
Place a cup under the hot-water spout.
T
Turn the switch to the
x
position.
‘Hot water’
, the preset amount of water flows into the cup.
Preparation stops automatically.
‘Switch close’
T
Turn the switch to the
°
position.
Your JURA is once more ready for use.
Adjusting the grinder
CAUTION
Hot water
J
CAUTION
