Jura WE6 Professional, Instructions For Use Manual

Page: 24 / 40

24
4 Permanent settings in programming mode
T Press the ‘Save’ button.
‘Saved’ appears briefly on the display.
‘4/5’
T
Press the ‘  ’ button to exit programming mode.
The harder the water is, the more frequently the JURA needs to be
descaled. It is therefore important to set the water hardness accu-
rately.
The water hardness was set when the machine was first used. You
can change this setting at any time.
The total water hardness can be adjusted on a continuous scale
between 1 °dH and 30 °dH.
T Press the ‘ P ’ button.
T Press the ‘ > ’ button several times until ‘4/5’ is displayed.
T Press the ‘Water hardness’ button.
‘Water hardness’
T Press the ‘ < ’ or ‘ > ’ button to change the setting for the
water hardness.
T Press the ‘Save’ button.
‘Saved’ appears briefly on the display.
‘4/5’
T Press the ‘  ’ button to exit programming mode.
Example: Proceed as follows to change the unit for the amount of
water from ‘ml’ to ‘oz’ .
T Press the ‘ P ’ button.
T Press the ‘ > ’ button several times until ‘4/5’ is displayed.
T Press the ‘Units’ button.
‘Units’
T Press the ‘oz’ button.
T Press the ‘Save’ button.
‘Saved’ appears briefly on the display.
‘4/5’
T
Press the ‘  ’ button to exit programming mode.
Setting the water
hardness
Unit for amount of water