background image

1.1  Safety  instructions

1.2  Explanation  of  symbols

Safety  instructions  and  symbols

1  

6  720  608  487  

below  the  text.

B  Immediately  call  the  gas  distribution  company  and  an  

authorized  technician  from  outside.

modified.

B  User  Tips:  End  a

maintenance  contract  with  an  authorized  technician,  and  
the  plant  must  be  inspected  annually.

B  The  user  must  be  informed  of  the  operation  and  

operation  of  the  boiler.

The  smell  of  gauze:

B  Draws  the  user's  attention  to  the  fact  that

only  by  an  authorized  technician.

B  Electric  switches  do  not  operate.

The  instructions  in  the  text  are  marked  

with  the  adjacent  symbol.  These  will  be  framed

B  A  check  must  be  carried  out  every  one  year

B  Combustion  air  and  room  air  must  not  contain  hazardous  

substances  (eg  halogenated  hydrocarbons  containing  

chlorine  or  fluorine  compounds)  to  prevent  corrosion.

•  Warning  is  used  when  minor  personal  injury  or  

serious  property  damage  may  occur.

B  Contact  a  technician.

Warning:

B  The  user  must  perform  maintenance  and

The  instructions  contain  important  information  that  does  not  

endanger  personnel  or  the  plant.

B  Only  original  spare  parts  will  be  used.

B  Do  not  use  or  store  flammable  materials

he  is  not  allowed  to  make  modifications  or  repair  the  

installation  himself.

B  The  boiler  switches  off.

B  The  windows  open.

•  Be  careful  when  using  damage

B  Close  the  gas  supply  valve.

The  smell  of  flue  gas:

B  Exhaust  pipe  not  required

B  Extinguish  all  open  flames.

with  a  horizontal  line  above  and

boiler  routine.

Customer  information

The  warning  words  are  used  to  characterize  the  seriousness  

of  the  danger  in  cases  where  risk  mitigation  measures  are  

not  followed.

B  The  boiler  must  be  assembled  and  modified  during  installation

Combustion  air  and  room  air

serious  injuries  to  staff,  including  in  cases  of  danger  of  

death

The  text  safety  instructions  appear  on  a  gray  

background  and  are  marked  on  the  side  with  

an  exclamation  mark  included  in  a  triangle.

Safety  instructions  and  symbols

B  The  user  is  responsible  for  the  safety  of  the  boiler  and  its  

compatibility  with  the  environment  in  which  it  was  located

Location,  change

•  Danger  is  used  when  injuries  may  occur

installed.

Explosive  or  highly  flammable  materials

(paper,  thinner,  paint,  etc.)  near  the  plant.

3  

minor  material.

B  Windows  and  doors  open.

a  regular  inspection  of  the  plant.

B  Do  not  close  or  reduce  the  vents.

Maintenance

Machine Translated by Google

Summary of Contents for Ceraclass midi ZS 24-2 DH AE 23





































Reviews: