7.5 Transformation to another type of gas
1,9
(kg/h)
B Refit the burner.
The measured values may vary by ± 0.5% from the set
values.
Warning:
Caution:
If the desired value is exceeded during the power
adjustment, turn the temperature controller to its
original position and make the adjustment again.
31,5
B Remove the control panel.
Gas family (type)
Power
B Turn off the gas valve.
B Check for gas leaks.
without prayer.
Propane
FIG. 32 Protective cover
1,7
16
1,6
Cod injector
If the type of gas indicated on the nameplate does not correspond to
the type of gas supplied, the boiler must be transformed.
Tab. 14 Gas flow for maximum output power
27,8
clamps.
14
35,3
completely in
B Gas adjustment is performed (see chapter 7.3 and
1,9
(kg/h)
Tab. 15
24
1,7
Bhutan
22
without prayer.
B Turn off the gas valve.
1,1
Fig. 33
2,1
B Shuts down the boiler to exit service mode.
1,4
B Remove the protective cover by releasing the four
12
B Turn the temperature knob
B Pass the modified gas type on the nameplate.
1,1
(l / min)
B Remove the burner.
42,7
GPL
28
74
20
When reassembling, make sure that the washer
between the protective cover and the static
chamber is in the correct position.
Gas regulation
B Remove the burner tubes and replace the injector.
Check settings
completely in
1,2
2,1
B Check gas flow and adjust if necessary.
39,0
Natural gas H
46,5
24,1
B Turn the temperature knob
The display shows a flashing light and the indication. The control
system will adjust the boiler to the maximum heating power.
B Switch off the boiler at the main switch.
NG
1,4
B Remove the jacket.
B Check gas flow and adjust if necessary.
heating (kW)
7.4).
B Save the settings (see chapter 7.2).
1,2
B Check for gas leaks.
The display shows a flashing light and the indication. The control
system will set the boiler to the minimum heating power.
1,6
Debit gaz
112
18
6 720 608 487
Machine Translated by Google
