Juniper WLA Series, Hardware Documentation

Page: 79 / 92

Figure 33: Pull the Category 5 Cable Through the Wall Bracket
3.
Install the bracket to the anchors using M3 or 6-32 wall anchors (see Figure 34 on
page 67 ).
Figure 34: Use M3 or 6-32 Wall Anchors to Secure the Bracket to Anchors
4.
Align the faceplate with the installed wall-mount bracket and secure the faceplate
using the two provided flat-tip screws and the screwdriver (see
Figure 35 on page 68 ).
67 Copyright © 2012, Juniper Networks, Inc.
Chapter 7: Installing and Connecting the Access Point