Juniper WLA Series, Hardware Documentation

Page: 78 / 92

To install the access point on the wall:
1.
Use the provided WLA532E wall-mount template to determine your anchor mounting
location (see
Figure 32 on page 66 ) and install the wall anchors (not included in the
WLA-BRKT-WALL kit).
Figure 32: Use the Provided Template to Install Wall Anchors
2.
Hold the wall-mount bracket centered over the wall anchors and pull the installed
Category 5 cable through the wall-mount bracket (see
Figure 33 on page 67 ).
Copyright © 2012, Juniper Networks, Inc. 66
WLA532E Access Point Hardware Documentation