Juniper WLA Series Hardware Documentation Download Page 18

Page: 18 / 92

•

Metal plenum mounting bracket—see

“Installing the WLA532E Access Point Using the

Plenum Bracket Kit” on page 51

•

North America single gang wall box adapter—see

“Installing the WLA532E Access

Point on the Wall Using the WLA-GNGWLBX-ADP-NA Wall-Mount Kit” on page 72

•

EU single gang wall box adapter—see

“Installing the WLA532E Access Point on the

Wall Using the WLA-GNGWLBX-ADP-EU Wall-Mount Kit” on page 70

Software and Hardware Used with the Access Point

Use the following software (from Juniper Networks) to configure and operate the access
point:

•

RingMaster GUI—RingMaster to configure and monitor the access point

•

Mobility System Software (MSS) CLI—MSS to configure the access point.

For more information, see the RingMaster and MSS guides at:

RingMaster and MSS Guides

Use the following hardware from Juniper Networks to connect the access point and make
it operational:

•

WLC2 Wireless LAN Controller

•

WLC200 Wireless LAN Controller

•

WLC216 Wireless LAN Controller

•

WLC8 Wireless LAN Controller

•

WLC800R Wireless LAN Controller

•

WLC880R Wireless LAN Controller

•

WLC2800 Wireless LAN Controller

The WLA532E access point can be powered up and operational within 3 minutes and
supports all features of RingMaster and Mobility System Software (MSS).

Documentation

WLA532E Antenna Models on page 7

•

External Antenna Configurations for the WLA532E Access Point on page 8

WLA532E Access Point Hardware Documentation

Summary of Contents for WLA Series










































































Search results

Summary of Contents for WLA Series

Reviews:

Brands by name

Popular brands

Juniper WLA Series, Hardware Documentation

Search results

Summary of Contents for WLA Series

Reviews:

Brands by name

Popular brands