Juniper WLA Series, Hardware Documentation

Page: 82 / 92

•
Installing the WLA532E Access Point on the Wall Using the WLA-GNGWLBX-ADP-EU
Wall-Mount Kit on page 70
•
Installing the WLA532E Access Point on the Wall Using the WLA-GNGWLBX-ADP-NA
Wall-Mount Kit on page 72
•
Installing the WLA532E Access Point on a Ceiling Rail Using the Trapeze Legacy
Mounting Bracket Adapter Kit on page 57
Installing the WLA532E Access Point on the Wall Using the WLA-GNGWLBX-ADP-EU
Wall-Mount Kit
The primary method of installing the WLA Series Wireless LAN WLA532E access point
is mounting it on the ceiling; however, you can also install the access point on the wall
by using one of three separately orderable wall-mount kits that can be purchased at
https://www.juniper.net/customers/support/ .
This topic covers installation of the WLA532E access point on the European Faceplate
Standard Hardware WLA-GNGWLBX-ADP-EU Kit. The EU faceplate is meant to be
installed directly onto an existing wall outlet box.
Ensure that you have the following parts and tools available to install the access point:
Copyright © 2012, Juniper Networks, Inc. 70
WLA532E Access Point Hardware Documentation