Juniper Ultra-Rubbed Field PC, Reference Manual

Page: 104 / 176

Taking the Field PC out of extended storage.
The
battery pack discharges slightly during extended storage
periods. When you are ready to use your Field PC again,
follow these steps so your battery pack runs efficiently:
1. Plug the Field PC into a charger.
2. Charge the battery pack. (To check the battery power
status, tap on the battery icon at the top of
the screen.) Only charge the battery pack in
temperatures between 32°F and 104°F (0°C and
40°C). For best results, charge the battery pack at
room temperature (68°F or 20°C).
Protecting the
touchscreen
Protect the touchscreen from impact, pressure, or
abrasive substances that could damage it. To further
protect the touchscreen, apply one of the adhesive
screen protectors that came with your Field PC.
CAUTION: Be sure to replace the screen protector as
often as the screen protector packaging directs.
To apply a screen protector, follow these steps:
1. Make sure the Field PC screen is free of oils and
dirt. You can wipe it with a microfiber cloth.
2. Peel back the paper liner from the screen protector,
exposing approximately one inch, as shown in the
following image.
96