Juniper SRX100B Hardware Manual Download Page 160

Page: 160 / 172

•

Never assume that power is disconnected from a circuit. Always check the circuit before
starting to work.

•

Carefully look for possible hazards in your work area, such as moist floors, ungrounded
power extension cords, and missing safety grounds.

•

Operate the services gateway within marked electrical ratings and product usage
instructions.

•

For the services gateway and peripheral equipment to function safely and correctly,
use the cables and connectors specified for the attached peripheral equipment, and
make certain they are in good condition.

Documentation

•

SRX100 Services Gateway Electrical and Power Requirements on page 30

•

SRX100 Services Gateway Maintenance and Operational Safety Guidelines and
Warnings on page 135

•

SRX100 Services Gateway Agency Approvals on page 143

•

Grounding the SRX100 Services Gateway on page 57

142

SRX100 Services Gateway Hardware Guide for B and H Model Numbers

Summary of Contents for SRX100B















































































































































Search results

Summary of Contents for SRX100B

Reviews:

Juniper SRX100B, Hardware Manual, Page: 160 / 172

Search results

Summary of Contents for SRX100B

Reviews: